S820E Microwave Site Master™ User Guide : Classic Mode Operation : Classic Mode and Advanced Mode
 
Classic Mode and Advanced Mode
 
Comparison of “Classic” Mode vs. “Advanced” Mode
Figure: “Classic Mode” Menu Keys (1 of 2) and Figure: “Classic Mode” Menu Keys (2 of 2) show an overview of the Classic Cable and Antenna Analyzer menus and keys. Descriptions of the main menus and associated submenus are provided in Cable and Antenna Measurements.
Menu Differences Between Classic Mode and Advanced Mode
Classic Mode
Advanced Cable and Antenna Mode
Meas Mode Menu
Freq – SWR
Freq – Return Loss
Freq – Cable Loss (one port)
Freq – Cable Loss (two port, ext. sensor)
DTF – SWR
DTF – Return Loss
—
—
Freq/Dist Menu
F1
F2
D1
D2
More
Marker Menu
Refer to Figure: “Classic Mode” Menu Keys (1 of 2) for “Classic” mode marker menu structure. Refer to Marker Menu for menu descriptions.
Meas/Disp Menu
Refer to Sweep Menu and Trace Menu
Note 
Also refer to Cable and Antenna Measurements for descriptions of other menus not specifically mentioned in Table: Menu Differences Between Classic Mode and Advanced Mode.
In Advanced Mode, two additional submenu keys are available to control the measurement display. In the Measurement Menu, the Display Format key toggles Single and Dual trace displays (refer to Dual Display Format). The Active Display key toggles the Top or Bottom trace to be active.