Cable and Antenna Analyzer Measurement Guide : Cable and Antenna Analyzer Measurements
 
Cable and Antenna Analyzer Measurements
 
Introduction
Measurement Overview
Line Sweep Measurements
Setting Frequency and Distance Parameters
Setting Frequency
FREQ/DIST Menu
Setting Distance
DTF AID Menu
DTF SETUP Menu
Setting Amplitude Parameters
Setting the Amplitude using Top and Bottom Keys
Setting the Amplitude using Auto Scale
Setting the Amplitude using Full Scale
Amplitude Menu
Setting up a Measurement
MEASURE Menu
Return Loss Measurement
VSWR Measurement
Cable Loss Measurement
DTF Return Loss and DTF VSWR Measurement
Smith Chart Measurement
1-Port Phase Measurement
Transmission (USB Sensor) Measurement
Transmission (2-port) Measurement (Option 21)
Time Domain Reflectometry (TDR) Measurements (Option 3)
Setting Sweep Parameters
Point Count
Run/Hold
Sweep Type
RF Immunity
SWEEP Menu
Setting Up Markers
Overview of Markers
Select, Activate, and Place a Marker / Delta Marker
Marker Table
Marker Search
Tracking Markers
Marker to Memory
MARKER Menu
MARKER SEARCH Menu
Setting Up Limit Lines
Single Limit Lines
Segmented Limit Lines
Limit Table
Limit Alarm
LIMIT Menu (Single)
LIMIT Menu (Segmented)
Setting Trace Parameters
Trace Overlay
Trace Math Example
TRACE Menu
Presetting the Analyzer
PRESET Menu
Saving and Recalling Measurements
Saving a Measurement
Recalling a Measurement
FILE Menu
Introduction
Anritsu supports two methods for making cable and antenna analyzer measurements. Field Master MS2080A and MS2090A instruments require an external Site Master S331P instrument, sold separately). Site Master MS2085A/MS2089A instruments are built with an internal cable and antenna analyzer.
This chapter is intended to assist you in setting up some common cable and antenna measurements, including setting up frequency, amplitude, sweep, marker, and trace parameters. Refer to Cable and Antenna Analyzer Measurements for the detailed information on measurement calibrations.
For an introduction to cable and antenna measurements, refer to Measurement Overview. After performing measurements, refer to Saving and Recalling Measurements for descriptions of saving, recalling, and managing measurement files.