Option 30 provides measurement capabilities for testing ISDB‑T networks, which are terrestrial digital broadcast networks. Note that Option 9 (IQ Demodulation Hardware) may be required in your instrument in order to use Option 30. The ISDB-T Signal Analyzer includes six types of measurements: Field Strength, Modulation Analysis, Spectrum Mask, Phase Noise, Spurious Emissions, and Spectrum Monitor.
After a test has been selected from the “Meas Selection (1/2) Menu (Custom and Easy)”, choose one of three methods for setting up a measurement:
Batch,
Easy, or
Custom. When either Custom Measurement mode or Easy Measurement mode has been selected, all measurements in the Meas Selection (1/2) menu are set up for that measurement mode. In Batch Measurement mode, a limited group of measurements are available (refer to
“Batch Measurement Setup”).
