• MS27201A Remote Spectrum Monitor
•  Product Information, Compliance, and Safety
  •  Important Notices and Warranty
    • Unauthorized Use or Disclosure
    • Export Management
    • Trademark Acknowledgments
    •  Warranty Information
      • Limitation of Warranty
      • Disclaimer of Warranties
      • No Liability For Consequential Damages
  •  Safety
    • Safety Notices Used in Manuals
    • Safety Symbols Used on Equipment and in Manuals
    • Safety Symbols and Notices
  •  Regulatory Compliance
    •  Compliance Notifications
      • CE Conformity Marking
      • European Parliament and Council Directive 2012/19/EC
      • UKCA Conformity Marking
      • RCM Conformity Marking
      • KCC Conformity Marking
      • Canadian ICES-001 and ICES-003 Conformity Marking
      • Recycle Marking
      • Proposition 65 Notification
      • Perchlorate Material Notification – Special Handling May Apply
      • Chinese RoHS Compliance Statement
•  Remote Spectrum Monitor MS27201A User Guide
  •  General Information
    •  Introduction
      • Before You Begin
      • Additional Documentation
      • Document Conventions
    •  Instrument Description
      • Available Models
      • Available Options
    •  Instrument Care and Preventive Maintenance
      • Ventilation and Cooling
      • Connector Care
      • ESD Caution
    • Calibration and Verification
    • Contacting Anritsu for Sales and Service
  •  Instrument Overview
    • Introduction
    •  Connector Panels
      • Front Panel
      • Rear Panel
    • Turning On the MS27201A RSM
    •  ARRT Software
      • Vision Monitor
    • PC Configuration Requirements
    • Installation
    • Connecting to the MS27201A or Simulation Mode
    •  GUI Overview
      • Title Bar
      • Common GUI Controls
      • Data Entry
      • Scroll Indication
    • Selecting the Analyzer
    •  System Menu
      • System Information
      • Notifications
    •  Settings Menu
      • Display Settings
      • Network Settings
      • Ethernet Settings
      • GNSS (GPS) Settings (Option 31)
      • Screenshot Setup
      • Language Settings
      • Date Time Settings
      • Port Setup
      • Options Settings
      • ADVANCED
      • Reset Settings
    •  Files
      • FTP Access
      • File Transfer
    •  Diagnostics
      • Event Log
      • Self Test
      • Service Mode
    •  Tools Menu
      • IQ STREAMING
      • DISCOVERY TOOL
      • PDF REPORTS
    •  Software Update
      • Installing the Software
  •  Notification Messages and Troubleshooting
    • Introduction
    • Self-Test Messages
    • Informational Notifications
    • Warning Notifications
    • Error Notifications
    • UDP Discovery Tool Firewall Settings
    • System Override
  •  Software Option Upgrades
    • Introduction
    • Exporting a Software Configuration File
    • Importing Software License
  •  Secure Data (Option 7)
    • Introduction
    •  Installing Secure Data Option 7
      • Turning On Secure Display
    • Remote Spectrum Monitor Memory Types
    • Erase All User Files in Internal Memory
    • Recommended Usage in a Secure Environment
•  Spectrum Analyzer Measurement Guide
  •  General Information
    •  Introduction
      • Related Manuals
    •  Option Descriptions
      • Wi-Fi (Option 5)
      • Preamp (Option 8)
      • Tracking Generator (Option 20)
      • Interference Analyzer (Option 24)
      • Zero Span IF Output (Option 89)
      • Gated Sweep (Option 90)
      • IQ Capture and Streaming (Options 124/126 and 125/127)
      • Coverage Mapping (Option 431)
      • EMF Measurement (Option 444)
      • AM/FM Modulation Measurement (Option 509)
      • Other Options and Features
    •  Document Conventions
      • User Interface Navigation
      • Illustrations
    • Contacting Anritsu for Sales and Service
  •  Spectrum Analyzer Overview
    • Introduction
    •  Selecting the Applications/Modes
      • RF Spectrum View
      • Spectrogram View
    •  Main Menu
      • Using Menus
    • Status Panel
  •  Spectrum Analyzer Measurements
    • Introduction
    • Connecting a Signal Source
    •  Setting Frequency Parameters
      • Entering Start and Stop Frequencies
      • Entering Center Frequency
      • Using Offset Frequency
      • Setting the Span
      • Zero Span IF Output (Option 89)
      • FREQ / SPAN Menu
      • GESTURES
      • FREQ / SPAN Menu in Zero Span
      • IF OUTPUT Menu (Option 89)
    •  Setting Amplitude Parameters
      • Setting Amplitude Units
      • Setting Amplitude Reference Level
      • Setting Amplitude Range and Scale
      • Reference Level Offset for External Loss or External Gain
      • Attenuator Functions
      • Preamplifier
      • Indications of Excessive Signal Level
      • Overpower Warning
      • AMPLITUDE Menu
    •  Field Strength
      • AMPLITUDE FIELD STRENGTH Menu
      • Example User Antenna Data
      • Antenna Calculations
    •  Setting Bandwidth Parameters
      • Resolution Bandwidth
      • Video Bandwidth
      • Setting Frequency Bandwidth
      • Setting Bandwidth Auto Coupling
      • BANDWIDTH Menu
    •  Setting Trace Parameters
      • Traces in RF Spectrum View
      • Trace Math in RF Spectrum View
      • Trace Normalization in RF Spectrum View
      • TRACE Menu (Spectrum View)
      • Trace Detector Types
      • Cursors in Spectrogram View
      • TRACE Menu (Spectrogram View)
      • TRACE CURSOR Menu
      • Trace Recording, Playback, and CSV Logging
      • TRACE RECORD Menu
      • TRACE PLAYBACK Menu
      • TRACE CSV LOGGING Menu
    •  Setting Sweep Parameters
      • Single/Continuous
      • Trace Points
      • Sweep Limitations
      • SWEEP Menu
      • Gated Sweep (Option 90)
      • GATED SWEEP
      • POWER VS TIME Display
      • GATED SWEEP ON Display
    •  Setting Up Markers
      • Placing a Normal Marker
      • Placing a Fixed Marker
      • Placing a Delta Marker
      • MARKER Menu
      • MARKER PEAK SEARCH
      • Marker Functions
      • Spectrogram with Cursors and Markers
      • Marker Table
    •  Setting Up Limit Lines
      • Simple Limit Line
      • Limit Line Envelope
      • LIMIT Menu
      • LIMIT EDIT
      • LIMIT MOVE Menu
      • LIMIT ENVELOPE Menu
    •  Setting Up Triggering
      • TRIGGER Menu in Zero Span
    •  Setting Up Advanced Measurements
      • MEASURE Menu
      • MEASURE Menu in Zero Span
      • SETUP Menu
      • IQ CAPTURE (Option 124/126)
      • IQ STREAMING (Option 125/127)
      • IQ TRIGGER
      • IQ Streaming Tool
    •  Transmission (Option 20)
      • STATUS PANEL (Transmission)
      • SETUP Menu (Transmission)
      • Tracking Generator Overview
      • CW Generator Overview
    •  Total Harmonic Distortion (THD)
      • STATUS PANEL (THD)
      • SETUP Menu (THD)
    •  Channel Power
      • STATUS PANEL (Channel Power)
      • SETUP Menu (Channel Power)
    •  Occupied Bandwidth
      • STATUS PANEL (Occupied BW)
      • SETUP Menu (Occupied BW)
    •  Adjacent Channel Power
      • STATUS PANEL (ACP)
      • SETUP Menu (ACP)
    •  Spectrum Emission Mask
      • Spectrum Emission Mask Measurement Basic Setup
      • STATUS PANEL (SEM)
      • SETUP Menu (SEM)
      • Example Custom Signal Emission Mask
    •  PIM/Interference (Option 24)
      • STATUS PANEL (PIM/Interference)
      • SETUP Menu (PIM/Interference)
    •  Electromagnetic Field (EMF) Measurements (Option 444)
      • Connecting the Antenna
      • STATUS PANEL (EMF Measurement)
      • SETUP Menu (EMF)
    •  Coverage Mapping (Option 431)
      • Outdoor Coverage Mapping
      • Indoor Coverage Mapping
      • MEASUREMENT Menu (Coverage Mapping)
      • STATUS PANEL (Coverage Mapping)
      • SETUP Menu (Coverage Mapping)
      • COLOR SETUP Menu (Coverage Mapping)
      • Map Tool
    •  AM/FM Audio (Requires Option 24 or Option 509)
      • AM/FM Audio – RF Spectrum View
      • SETUP Menu (AM/FM Audio RF Spectrum)
    •  AM/FM Modulation Measurement (Option 509)
      • AM/FM Metrics
      • SETUP Menu (AM/FM Audio – All Measurements View)
      • STATUS PANEL (AM/FM Audio)
    •  Carrier-to-Interference
      • STATUS PANEL (C/I)
      • SETUP Menu (C/I)
    •  SETUP Menu
      • SETUP Menu (Spectrogram View)
    •  Presetting the Analyzer
      • PRESET Menu
    •  Saving and Recalling Measurements
      • Saving a Measurement
      • Recalling a Measurement
      • FILE Menu
  •  IA Spectrum Analyzer (Option 24)
    • Introduction
    •  Making IA Spectrum Analyzer Measurements
      • Initial Setup
    •  Setting Up Advanced Measurements
      • MEASURE Menu
      • SETUP Menu (Spectrum)
    •  Interference Map
      • STATUS Panel (Interference Map and Interference Polar)
      • SETUP Menu (Interference Map)
    •  Interference Polar
      • SETUP Menu (Interference Polar)
    •  Saving and Recalling Measurements
      • Saving a Measurement
      • Recalling a Measurement
      • FILE Menu
      • SAVE ON EVENT Menu
•  Real-Time Spectrum Analyzer (RTSA) Measurement Guide
  •  General Information
    •  Introduction
      • Related Manuals
    •  Options Description
      • AM/FM Modulation Measurement (Option 509)
      • Interference Finder (Option 24)
      • Other Options and Features
    •  Document Conventions
      • User Interface Navigation
      • Illustrations
    • Contacting Anritsu for Sales and Service
  •  RTSA (Option 199) Overview
    • Introduction
    • Selecting the Applications/Modes
    •  RTSA GUI Overview
      • RF Spectrum View
      • Spectrogram View
    •  Main Menu
      • Using Menus
    • Status Panel (RTSA)
  •  RTSA Measurements
    • Introduction
    •  Making RTSA Measurements
      • Connecting a Signal Source
    •  Setting Frequency Parameters
      • Entering Start and Stop Frequencies
      • Entering a Center Frequency
      • Using Offset Frequency
      • Setting the Span
      • FREQ / SPAN Menu
      • GESTURES Menu
    •  Setting Amplitude Parameters
      • Setting Amplitude Units
      • Setting Amplitude Reference Level
      • Setting Amplitude Range and Scale
      • Reference Level Offset for External Loss or External Gain
      • Attenuator Functions
      • Preamplifier
      • Indications of Excessive Signal Level
      • Overpower Warning
      • AMPLITUDE Menu
    •  Setting Bandwidth Parameters
      • Resolution Bandwidth
      • Setting Frequency Bandwidth
      • Setting Bandwidth Auto Coupling
      • BANDWIDTH Menu
    •  Setting Trace and Cursor Parameters
      • Traces in RF Spectrum View
      • TRACE Menu (RF Spectrum View)
      • Trace Detector Types
      • Cursors in Spectrogram View
      • TRACE Menu (Spectrogram View)
      • TRACE CURSOR Menu
      • Trace Recording, Playback, and CSV Logging
      • TRACE RECORD Menu
      • TRACE PLAYBACK Menu
      • TRACE CSV LOGGING Menu
    •  Setting Sweep Parameters
      • Single/Continuous
      • SWEEP Menu
    •  Setting Up Markers
      • Placing a Normal Marker
      • Placing a Fixed Marker
      • Placing a Delta Marker
      • MARKER Menu
      • MARKER PEAK SEARCH Menu
      • Marker Functions
      • Spectrogram with Cursors and Markers
      • Marker Table
    •  Setting Up Limit Lines
      • Simple Limit Line
      • Limit Line Envelope
      • LIMIT Menu
      • LIMIT EDIT Menu
      • LIMIT MOVE Menu
      • LIMIT ENVELOPE Menu
    •  Setting Up Triggering
      • TRIGGER Menu
    •  Setting Up Advanced Measurements
      • MEASURE Menu (RTSA)
      • IQ CAPTURE Menu
      • IQ STREAMING Menu
      • IQ TRIGGER Menu
      • IQ Streaming Tools
    • SETUP Menu
    • SETUP Menu (Spectrogram View)
    •  Interference Finder (Option 24)
      • SETUP Menu (PIM/Interference)
      • Status Panel (PIM/Interference)
    •  AM/FM Audio (Requires Option 24 or Option 509)
      • AM/FM Audio – RF Spectrum View
      • SETUP Menu (AM/FM Audio - RF Spectrum)
    •  AM/FM Modulation Measurement (Option 509)
      • AM/FM Metrics
      • SETUP Menu (AM/FM Audio – All Measurements)
      • Status Panel (AM/FM Audio)
    •  Presetting the Analyzer
      • PRESET Menu
    •  Saving and Recalling Measurements
      • Saving a Measurement
      • Recalling a Measurement
      • FILE Menu
      • SAVE ON EVENT Menu
  •  IA Real-Time Spectrum Analyzer (Option 24)
    • Introduction
    •  Making IA RTSA Measurements
      • Initial Setup
    •  Setting Up Advanced Measurements
      • MEASURE Menu
      • SETUP Menu (RTSA)
    •  Interference Map
      • STATUS Panel (Interference Map and Interference Polar)
      • SETUP Menu (Interference Map)
    •  Interference Polar
      • SETUP Menu (Interference Polar)
    •  Saving and Recalling Measurements
      • Saving a Measurement
      • Recalling a Measurement
      • FILE Menu
      • SAVE ON EVENT Menu
•  5GNR Analyzer Measurement Guide
  •  General Information
    •  Introduction
      • Related Manuals
    •  Option Descriptions
      • 5GNR Analyzer (Option 888)
      • Gated Sweep (Option 90)
      • Coverage Mapping (Option 431)
      • GNSS Receiver (Option 31)
      • Other Options and Features
    •  Document Conventions
      • User Interface Navigation
      • Illustrations
    • Contacting Anritsu for Sales and Service
  •  5GNR Analyzer (Option 888)
    •  Introduction
      • RF Measurements
      • Modulation Measurements
      • Coverage Mapping
    • Selecting the Analyzer
    •  Main Menu
      • Using Menus
    •  Setting Frequency and Band Parameters
      • Configuring the Band
      • FREQ SPAN Menu
      • BAND CONFIG Menu
      • GESTURES Menu
    •  Setting Amplitude Parameters
      • Reference Level Offset for External Loss or External Gain
      • Attenuator Functions
      • Indications of Excessive Signal Level
      • Overpower Warning
      • AMPLITUDE Menu
    •  Setting Bandwidth Parameters
      • BANDWIDTH Menu
    •  Setting Trace Parameters
      • TRACE Menu
      • Trace Detector Types
    •  Setting Sweep Parameters
      • SWEEP Menu – Summary Measurements
      • SWEEP Menu – RF Measurements
      • Gated Sweep (Option 90)
      • GATED SWEEP Menu
      • GATED SWEEP ON Display
      • POWER VS. TIME Display
    •  Setting Up Markers
      • Placing a Normal Marker
      • Placing a Fixed Marker
      • Placing a Delta Marker
      • MARKER Menu
      • MARKER PEAK SEARCH Menu
      • Marker Functions
      • Marker Table
    •  5GNR Measurement Setup
      • MEASURE Menu (5GNR)
    •  5GNR Summary and OTA (Multi PCI)
      • 5GNR Summary Single Beam View
      • 5GNR Summary Multi Beam View
      • SIB Measurement
      • SIB USER MNC/MCC MAPS
      • 5GNR Summary Table View
      • SETUP Menu (5GNR Summary)
      • Status Panel (5GNR Summary)
      • OTA (Multi PCI) Scanner View
      • OTA (Multi PCI) Table View
      • OTA (Multi PCI) Time Offset Table View
      • SETUP Menu (OTA (Multi PCI))
      • Status Panel (5GNR OTA (Multi PCI))
    •  5GNR Carrier Aggregation
      • 5GNR Carrier Aggregation View
      • SETUP Menu (5GNR Carrier Aggregation)
      • Status Panel (5GNR Carrier Aggregation)
    •  5GNR Channel Power
      • SETUP Menu (5GNR Channel Power)
      • Status Panel (5GNR Channel Power)
    •  5GNR Occupied Bandwidth
      • SETUP Menu (5GNR OBW)
      • Status Panel (5GNR OBW)
    •  5GNR Adjacent Channel Power
      • SETUP Menu (5GNR ACP)
      • STATUS PANEL (ACP)
    •  5GNR Spectrum Emission Mask
      • Spectrum Emission Mask Measurement Basic Setup
      • SETUP Menu (5GNR SEM)
      • Example Custom Signal Emission Mask
      • STATUS PANEL (5GNR SEM)
    •  5GNR Constellation
      • SETUP Menu (5GNR Constellation)
      • Status Panel (5GNR Constellation)
    •  5GNR EIRP
      • EIRP Normal View
      • EIRP Quick View
      • SETUP Menu (5GNR EIRP)
      • Status Panel (5GNR EIRP)
    •  5GNR UL/DL Interference
      • SETUP Menu (5GNR UL/DL Interference)
      • Status Panel (5GNR UL/DL Interference)
    •  5GNR Coverage Mapping (Option 431)
      • Outdoor Coverage Mapping
      • Indoor Coverage Mapping
      • MEASURE Menu (Coverage Mapping)
      • SETUP Menu (Coverage Mapping)
      • COLOR SETUP Menu (Coverage Mapping)
      • Status Panel (5GNR Coverage Mapping)
    •  Presetting the Analyzer
      • PRESET Menu
    •  Saving and Recalling Measurements
      • Saving a Measurement
      • Recalling a Measurement
      • FILE Menu
  •  5GNR SIB/MIB Decode
    •  Introduction
      • Downlink Control Information (DCI)
      • Master Information Block (MIB)
      • MIB Data
      • System Information Block (SIB)
      • SIB Data
      • Anritsu Hardware Status
•  LTE FDD/TDD Signal Analyzer Measurement Guide
  •  General Information
    •  Introduction
      • Related Manuals
    •  Option Descriptions
      • LTE Analyzer (Option 883)
      • Gated Sweep (Option 90)
      • Coverage Mapping (Option 431)
      • GNSS Receiver (Option 31)
      • Other Options and Features
    •  Document Conventions
      • User Interface Navigation
      • Illustrations
    • Contacting Anritsu for Sales and Service
  •  LTE Analyzer (Option 883)
    • Introduction
    • Selecting the Applications/Modes
    •  Main Menu
      • Using Menus
    •  Setting Frequency and Bandwidth Parameters
      • Configuring the Band
      • FREQ SPAN Menu
      • SIGNAL STANDARDS Dialog
      • GESTURES Menu
    •  Setting Amplitude
      • Setting Amplitude Parameters
      • Reference Level Offset for External Loss or External Gain
      • Attenuator Functions
      • Indications of Excessive Signal Level
      • Overpower Warning
      • AMPLITUDE Menu
    •  Setting Bandwidth Parameters
      • BANDWIDTH Menu
    •  Setting Trace Parameters
      • TRACE Menu
      • Trace Detector Types
    •  Setting Sweep Parameters
      • SWEEP Menu – LTE Demod Summary Measurements
      • SWEEP Menu – LTE RF Measurements
      • Gated Sweep (Option 90)
      • GATED SWEEP Menu
      • GATED SWEEP ON Display
      • POWER VS. TIME Display
    •  Setting Up Markers
      • Placing a Normal Marker
      • Placing a Fixed Marker
      • Placing a Delta Marker
      • MARKER Menu
      • MARKER PEAK SEARCH Menu
      • Marker Functions
      • Marker Table
    •  LTE Measurement Setup
      • MEASURE Menu (LTE)
    •  LTE Demod Summary
      • LTE Summary View
      • SIB Measurement
      • SIB USER MNC/MCC MAPS
      • LTE Time Alignment Error (TAE) View
      • LTE Resource Block (RB) Power View
      • LTE Summary Table View
      • SETUP Menu (LTE Demod Summary)
      • Status Panel (LTE Demod Summary)
    •  LTE Multi PCI
      • SETUP Menu (LTE Multi PCI)
      • Status Panel (LTE Multi PCI)
    •  LTE Channel Power
      • SETUP Menu (LTE Channel Power)
      • Status Panel (LTE Channel Power)
    •  LTE Channel Spectrum
      • SETUP Menu (LTE Channel Spectrum)
      • Status Panel (LTE Channel Spectrum)
    •  LTE Carrier Aggregation
      • SETUP Menu (LTE Carrier Aggregation)
      • Status Panel (LTE Carrier Aggregation)
    •  LTE Adjacent Channel Power
      • SETUP Menu (LTE ACP)
      • STATUS PANEL (LTE ACP)
    •  LTE Spectrum Emission Mask
      • Spectrum Emission Mask Measurement Basic Setup
      • SETUP Menu (LTE SEM)
      • Example Custom Signal Emission Mask
      • STATUS PANEL (LTE SEM)
    •  LTE Control Channel
      • SETUP Menu (LTE Control Channel)
      • Status Panel (LTE Control Channel)
    •  LTE Constellation
      • SETUP Menu (LTE Constellation)
      • Status Panel (LTE Constellation)
    •  LTE UL/DL Interference
      • SETUP Menu (LTE UL/DL Interference)
      • Status Panel (LTE UL/DL Interference)
    •  LTE Coverage Mapping (Option 431)
      • Outdoor Coverage Mapping
      • Indoor Coverage Mapping
      • MEASURE Menu (Coverage Mapping)
      • SETUP Menu (LTE Coverage Mapping)
      • COLOR SETUP Menu (Coverage Mapping)
      • Status Panel (LTE Coverage Mapping)
    •  Presetting the Analyzer
      • PRESET Menu
    •  Saving and Recalling Measurements
      • Saving a Measurement
      • Recalling a Measurement
      • FILE Menu
  •  LTE MIB/SIB Decode
    •  Introduction
      • Downlink Control Information (DCI)
      • Master Information Block (MIB)
      • MIB Data
      • System Information Block (SIB)
      • SIB Data
      • Anritsu Hardware Status
•  WCDMA Analyzer Measurement Guide
  •  General Information
    •  Introduction
      • Related Manuals
    •  Option Descriptions
      • WCDMA Analyzer (Option 871)
      • Gated Sweep (Option 90)
      • GNSS Receiver (Option 31)
      • Other Options and Features
    •  Document Conventions
      • User Interface Navigation
      • Illustrations
    • Contacting Anritsu for Sales and Service
  •  WCDMA Analyzer Overview (Option 871)
    • Introduction
    • Selecting the Applications/Modes
    •  Main Menu
      • Using Menus
  •  WCDMA FDD Analyzer Measurements
    •  Introduction
      • RF Measurements
      • Modulation Measurements
    •  Setting Frequency and Bandwidth Parameters
      • FREQUENCY Menu
      • GESTURES Menu
    •  Setting Amplitude
      • Setting Amplitude Parameters
      • Reference Level Offset for External Loss or External Gain
      • Attenuator Functions
      • Indications of Excessive Signal Level
      • Overpower Warning
      • AMPLITUDE Menu
    •  Setting Bandwidth Parameters
      • BANDWIDTH Menu
    •  Setting Trace Parameters
      • Traces in WCDMA
      • Trace Math
      • Trace Normalization
      • TRACE Menu
      • Trace Detector Types
    •  Setting Sweep Parameters
      • SWEEP Menu – WCDMA Demod Summary Measurements
      • SWEEP Menu – WCDMA RF Measurements
    •  Setting Up Markers
      • Placing a Normal Marker
      • Placing a Fixed Marker
      • Placing a Delta Marker
      • MARKER Menu
      • MARKER PEAK SEARCH Menu
      • Marker Functions
      • Marker Table
    •  WCDMA Measurement Setup
      • MEASURE Menu (WCDMA)
    •  WCDMA Demod Summary
      • WCDMA Demod Summary View
      • WCDMA Summary Table View
      • STATUS PANEL (WCDMA Demod Summary)
      • SETUP MENU (WCDMA Demod Summary)
    •  WCDMA Channel Power
      • SETUP Menu (Channel Power)
      • STATUS PANEL (Channel Power)
    •  WCDMA Occupied Bandwidth
      • SETUP Menu (Occupied BW)
      • STATUS PANEL (Occupied BW)
    •  WCDMA Adjacent Channel Power
      • SETUP Menu (ACP)
      • STATUS PANEL (ACP)
    •  WCDMA Spectrum Emission Mask
      • Spectrum Emission Mask Measurement Basic Setup
      • SETUP Menu (SEM)
      • Example Custom Signal Emission Mask
      • STATUS PANEL (SEM)
    •  Presetting the Analyzer
      • PRESET Menu
    •  Saving and Recalling Measurements
      • Saving a Measurement
      • Recalling a Measurement
      • FILE Menu
•  Channel Scanner Measurement Guide
  •  General Information
    •  Introduction
      • Related Manuals
    •  Option Description
      • Channel Scanner (Option 27)
    •  Document Conventions
      • User Interface Navigation
      • Illustrations
    • Calibration and Verification
    • Contacting Anritsu for Sales and Service
  •  Channel Scanner (Option 27) Overview
    • Introduction
    •  Selecting the Analyzer
      • GUI Overview
    •  Main Menu
      • Using Menus
    • Status Panel (Bar Chart)
    • Status Panel (Mapping View)
  •  Channel Scanner Measurements
    • Introduction
    •  Setting Amplitude Parameters
      • Setting Amplitude Units
      • Setting Amplitude Reference Level
      • Setting Amplitude Range and Scale
      • Reference Level Offset for External Loss or External Gain
      • Preamplifier
      • Indications of Excessive Signal Level
      • Overpower Warning
    •  Field Strength
      • AMPLITUDE FIELD STRENGTH Menu
      • Example User Antenna Data
      • Antenna Calculations
    • AMPLITUDE Menu
    • SCAN Menu
    • MEASURE Menu
    •  MEASURE Menu (Mapping View)
      • Bar Chart
      • Strip Chart
      • Mapping
    •  SETUP Menu
      • ADD CHANNELS
    •  SETUP Menu (Mapping View)
      • COLOR SETUP Menu (Mapping)
      • Outdoor Coverage Mapping
      • Indoor Coverage Mapping
    • PRESET Menu
    •  FILE Menu
      • CSV LOGGING Menu
    •  Saving and Recalling Measurements
      • Saving a Measurement
      • Recalling a Measurement
•  Pulse Analyzer Measurement Guide
  •  General Information
    •  Introduction
      • Related Manuals
    • Option Description
    •  Document Conventions
      • User Interface Navigation
      • Illustrations
    • Contacting Anritsu for Sales and Service
  •  Pulse Analyzer (Option 421)
    • Introduction
    • Selecting the Analyzer
    •  Pulse Analyzer GUI Overview
      • Pulse Trace Profile and Summary Data
    •  Pulse Measurements
      • Finding the High/Low Reference Levels Using the Histogram Algorithm
      • Finding the Reference Level Instants
      • Tips for Improving Pulse Measurement Results
    •  Main Menu
      • Using Menus
    • Status Panel
    • Connecting a Signal Source
    •  Setting Frequency Parameters
      • Entering a Center Frequency
      • Using Offset Frequency
      • FREQ SPAN Menu
    •  Setting Amplitude Parameters
      • Setting Amplitude Reference Level
      • Setting Amplitude Range and Scale
      • Reference Level Offset for External Loss or External Gain
      • Attenuator Functions
      • Preamplifier
      • Indications of Excessive Signal Level
      • AMPLITUDE Menu
    •  Setting Bandwidth Parameters
      • Resolution Bandwidth
      • Video Bandwidth
      • Setting Resolution Bandwidth
      • Setting Bandwidth Auto Coupling
      • BANDWIDTH Menu
    •  Setting Trace Parameters
      • Traces in Pulse Mode (Pulse Analyzer View)
      • TRACE Menu
      • Trace Detector Types
    •  Setting Sweep Parameters
      • Single/Continuous
      • Trace Points
      • SWEEP Menu
    •  Setting Up Markers (Pulse Viewer Mode)
      • Placing a Normal Marker
      • Placing a Fixed Marker
      • Placing a Delta Marker
      • MARKER Menu
      • MARKER PEAK SEARCH Menu
      • Marker Functions
    •  Setting Up Triggering
      • TRIGGER Menu
    •  Measurement Setup
      • MEASURE Menu
      • SETUP Menu
      • PULSE SIMULATION Menu
      • DISPLAY Menu
    •  Presetting the Analyzer
      • PRESET Menu
    •  Saving and Recalling Measurements
      • Saving a Measurement
      • Recalling a Measurement
      • FILE Menu
•  IQ Capture/Streaming (Option 124/126 and 125/127) Measurement Guide
  •  General Information
    •  Introduction
      • Related Manuals
    •  Option Description
      • IQ Capture and Streaming (Options 124/126 and 125/127)
      • Other Options and Features
    •  Document Conventions
      • User Interface Navigation
      • Illustrations
    • Contacting Anritsu for Sales and Service
  •  IQ Capture/Streaming (Option 124/126 and 125/127)
    • Introduction
    • IQ Capture Block Mode
    •  IQ Data Format
      • IQ Frame Structure
      • IQ Extended Frame
      • IQ Timestamps
    •  IQ Streaming
      • Data Transmission to Remote User
    • IQ Capture/Streaming Measurement
    • Setting Up the Data Out Port and MA25424A
  •  Programming with SCPI
    •  Scope of Manual
      • Additional Documentation
    • Introduction
    •  Remote Programming Setup and Interface
      • Network Interface Connection and Setup
      • Ethernet Configuration
      • USBTMC Interface Connection and Setup (MS27200A)
    • Sending SCPI Commands with NI-VISA
    •  SCPI Command Overview
      • Command Names
      • Command Syntax
      • Data Parameters
      • Spectrum Trace Data Format
      • Unit Suffixes
      • Query Commands
      • Hierarchical Command Structure
    •  SCPI Command Types
      • SCPI Common Commands
      • *CLS
      • *IDN?
      • *RST
      • SCPI Required Commands
      • SCPI Optional Commands
    •  Status System Reporting
      • Status Group Registers
      • Status Group Reporting
    • SCPI Commands
    •  SCPI Command Programming Examples
      • Notational Examples
      • Spectrum Trace Data via SCPI
      • C/C++
      • IQ Capture Programming Examples
  •  MS2720xA Commands
    •  Common Commands
      • *CLS
      • *ESE <numeric_value>
      • *ESR?
      • *IDN?
      • *OPC
      • *OPT?
      • *RCL <numeric_value>
      • *RST
      • *SAV <numeric_value>
      • *SRE <numeric_value>
      • *STB?
      • *TST?
      • *WAI
    •  System Commands
      • :DIAGnostic:MEMory?
      • :DISPlay:LANGuage <EN|DE|ES|ZH|JA|FR|KO|IT>
      • :FETCh:GPS?
      • :FETCh:GPS:ALL?
      • :FETCh:GPS:FULL?
      • :FETCh:GPS:LAST?
      • :INSTrument:APPLication:STATe <SPA>,<0 | 1 | ON | OFF>
      • :INSTrument:CATalog:ACTive?
      • :INSTrument:CATalog:ALL?
      • :INSTrument:CATalog:FULL?
      • :INSTrument:NSELect <numeric_value>
      • :INSTrument[:SELect] <SPA>
      • :MMEMory:CATalog:DIRectory? <string>,<string>
      • :MMEMory:CATalog:DIRectory:SIZE? <string>,<string>
      • :MMEMory:CATalog:MSUSs?
      • :MMEMory:CDIRectory <string>
      • :MMEMory:COPY <string>,<string>,<string>,<string>
      • :MMEMory:CREate:DIRectory <string>,<string>
      • :MMEMory:DATA <string>,<string>,<block data>
      • :MMEMory:DELete:DIRectory <string>,<string>
      • :MMEMory:DELete:FILe <string>,<string>
      • :MMEMory:EJECt <string>
      • :MMEMory:LOAD:STATe <numeric_value>,<string>,<string>
      • :MMEMory:LOAD:TRACe <string>,<string>,<string>
      • :MMEMory:MSIS <string>
      • :MMEMory:STORe:STATe <numeric_value>,<string>,<string>
      • :MMEMory:STORe:TRACe <string>,<string>,<string>
      • :OUTPut:ROSCillator:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:BIAS:EXTernal:CURRent?
      • [:SENSe]:BIAS:EXTernal:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:BIAS:EXTernal:TRIPped[:STATe]?
      • [:SENSe]:BIAS:EXTernal:TRIPped[:STATe]:CLEar
      • [:SENSe]:BIAS:EXTernal:VOLTage <numeric_value>
      • [:SENSe]:FREQuency:REFerence:SOURce?
      • [:SENSe]:RF:SAFE:MODE <0 | 1 | ON | OFF>
      • [:SENSe]:TIME:REFerence:SOURce?
      • :SYSTem:COMMunicate:LAN:CONFig <string>,[<string>],[<string>]
      • :SYSTem:COMMunicate:LAN:CONFig:CURRent?
      • :SYSTem:COMMunicate:LAN:DHCP <ON|OFF>
      • :SYSTem:COMMunicate:LAN:DNS <string>,<string>,<string>
      • :SYSTem:COMMunicate:LAN:DNSServer:APPend <string>, {<string>}, ...
      • :SYSTem:COMMunicate:LAN:DNSServer:DELete <string>, {<string>}, ...
      • :SYSTem:COMMunicate:LAN:DNSServer:LIST <string>, {<string>}, ...
      • :SYSTem:COMMunicate:LAN:FTP:STATe <0 | 1 | ON | OFF>
      • :SYSTem:COMMunicate:LAN:HOSTname <string>
      • :SYSTem:COMMunicate:LAN:HTTP:SECure:STATe <0 | 1 | ON | OFF>
      • :SYSTem:COMMunicate:LAN:SECure:CREDentials <string>,<string>,<RSA>
      • :SYSTem:COMMunicate:LAN:SECure:SSLCertificate?
      • :SYSTem:COMMunicate:WLAN:CONFig:CURRent?
      • :SYSTem:COMMunicate:WLAN:CONNection <string>,[<string>]
      • :SYSTem:COMMunicate:WLAN:CONNection:ACTive?
      • :SYSTem:COMMunicate:WLAN:CONNection:DISConnect
      • :SYSTem:COMMunicate:WLAN:CONNection:FORGet <string>
      • :SYSTem:COMMunicate:WLAN:CONNection:FORGet:ALL
      • :SYSTem:COMMunicate:WLAN:CONNection:SAVed?
      • :SYSTem:COMMunicate:WLAN:CONNection:STATus?
      • :SYSTem:COMMunicate:WLAN:NETWorks?
      • :SYSTem:COMMunicate:WLAN:NETWorks:REFResh
      • :SYSTem:COMMunicate:WLAN:STATe <0 | 1 | ON | OFF>
      • :SYSTem:DATE <numeric_value>,<numeric_value>,<numeric_value>
      • :SYSTem:DEFault:RESet:ALL
      • :SYSTem:DEFault:RESet:DATA <USER|SYSTem>
      • :SYSTem:DEFault:RESet:FACTory
      • :SYSTem:ERRor:DISPlay <0 | 1 | ON | OFF>
      • :SYSTem:ERRor[:NEXT]?
      • :SYSTem:FIRMware:UPDate <string>,<string>
      • :SYSTem:FIRMware:UPDate:LIST?
      • :SYSTem:FIRMware:UPDate:REMote <string>
      • :SYSTem:FIRMware:UPDate:REMote:AUTO <0 | 1 | ON | OFF>
      • :SYSTem:FIRMware:UPDate:REMote:LATest?
      • :SYSTem:FIRMware:UPDate:REMote:LIST?
      • :SYSTem:FIRMware:UPDate:REMote:LIST:REFResh
      • :SYSTem:FIRMware:UPDate:REMote:SOURce <string>
      • :SYSTem:FIRMware:VERSion?
      • :SYSTem:GPS:SEARch:MODE <GGLonass|GGALileo|GBEidou|GGGalileo>
      • :SYSTem:GPS:STATe <0 | 1 | ON | OFF>
      • :SYSTem:GPS:VOLTage <numeric_value>
      • :SYSTem:LOG:ERRor?
      • :SYSTem:MACaddress?
      • :SYSTem:OPTions?
      • :SYSTem:OPTions:ALL?
      • :SYSTem:OPTions:CONFig?
      • :SYSTem:OPTions:TIMed:ACTivate <string>
      • :SYSTem:OPTions:UPDate:REMote
      • :SYSTem:OPTions:UPGRade <string>
      • :SYSTem:PASSword:CDISable <string>
      • :SYSTem:PASSword:CENable <string>
      • :SYSTem:PASSword:CENable:ALL <string>
      • :SYSTem:PASSword:CONNection:STATe?
      • :SYSTem:PASSword:INTegrity?
      • :SYSTem:PASSword:NEW <string>,<string>
      • :SYSTem:PASSword:SET?
      • :SYSTem:PASSword:SSLKey?
      • :SYSTem:PASSword:STATe?
      • :SYSTem:PRESet
      • :SYSTem:PRESet:MODE
      • :SYSTem:REBoot
      • :SYSTem:REMote:DISPlay:LOCK <0 | 1 | ON | OFF>
      • :SYSTem:SETup:SHORtcuts <numeric_value>,<string>,[<string>]
      • :SYSTem:SETup:SHORtcuts:CLEar
      • :SYSTem:SETup:SHORtcuts:DEL <numeric_value>
      • :SYSTem:SETup:SHORtcuts:LOAD <numeric_value>
      • :SYSTem:SETup:SHORtcuts:REName <numeric_value>,<string>
      • :SYSTem:TEMPerature?
      • :SYSTem:TIME <numeric_value>,<numeric_value>,<numeric_value>
      • :SYSTem:TIME:SYNC <AUTO|MANual>
      • :SYSTem:TIME:SYNC:STATus?
      • :SYSTem:TIME:ZONE <string>
      • :SYSTem:TIME:ZONE:CATalog?
      • :SYSTem:UNIT:NAMe <string>
      • :TEST:SELFtest?
      • :TRIGger[:SEQuence]:PORT<n>[:DIRection] <IN|OUT>
    •  Spectrum Analyzer Commands
      • :ABORt
      • :CALCulate:LIMit<n>:COMMent <string>
      • :CALCulate:LIMit<n>:CONTrol[:DATA] <numeric_value> {HZ | KHZ | MHZ | GHZ}, {<numeric_value> {HZ | KHZ | MHZ | GHZ}}, ...
      • :CALCulate:LIMit<n>:CONTrol:MODE <ABSolute|RELative>
      • :CALCulate:LIMit<n>:CONTrol:SHIFt <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • :CALCulate:LIMit<n>:COPY <numeric_value>
      • :CALCulate:LIMit<n>:DELete
      • :CALCulate:LIMit<n>:FAIL?
      • :CALCulate:LIMit<n>:LOWer[:DATA] <numeric_value> {<amplitude_units>}, {<numeric_value> {<amplitude_units>}}, ...
      • :CALCulate:LIMit<n>:LOWer:MODE <ABSolute|RELative>
      • :CALCulate:LIMit<n>:LOWer:SHIFt <numeric_value> {DB}
      • :CALCulate:LIMit<n>:LOWer:STATe <0 | 1 | ON | OFF>
      • :CALCulate:LIMit<n>:NAME <string>
      • :CALCulate:LIMit<n>:STATe <0 | 1 | ON | OFF>
      • :CALCulate:LIMit<n>:TRACe<n>:CHECk <0 | 1 | ON | OFF>
      • :CALCulate:LIMit<n>:UPPer[:DATA] <numeric_value> {<amplitude_units>}, {<numeric_value> {<amplitude_units>}}, ...
      • :CALCulate:LIMit<n>:UPPer:MODE <ABSolute|RELative>
      • :CALCulate:LIMit<n>:UPPer:SHIFt <numeric_value> {DB}
      • :CALCulate:LIMit<n>:UPPer:STATe <0 | 1 | ON | OFF>
      • :CALCulate:LIMit:ACTive?
      • :CALCulate:ACPower:LIMit:ADJacent:ABSolute <numeric_value> {<amplitude_units>}
      • :CALCulate:ACPower:LIMit:ADJacent:LOWer:FAIL?
      • :CALCulate:ACPower:LIMit:ADJacent:RELative <numeric_value> {DB}
      • :CALCulate:ACPower:LIMit:ADJacent:UPPer:FAIL?
      • :CALCulate:ACPower:LIMit:ALTernate:ABSolute <numeric_value> {<amplitude_units>}
      • :CALCulate:ACPower:LIMit:ALTernate:LOWer:FAIL?
      • :CALCulate:ACPower:LIMit:ALTernate:RELative <numeric_value> {DB}
      • :CALCulate:ACPower:LIMit:ALTernate:UPPer:FAIL?
      • :CALCulate:ACPower:LIMit:FAIL?
      • :CALCulate:ACPower:LIMit:MAIN <numeric_value> {<amplitude_units>}
      • :CALCulate:ACPower:LIMit:MODE <ABSolute|RELative>
      • :CALCulate:ACPower:LIMit:STATe <0 | 1 | ON | OFF>
      • :CALCulate:CHPower:LIMit <numeric_value> {<amplitude_units>}
      • :CALCulate:CHPower:LIMit:FAIL?
      • :CALCulate:CHPower:LIMit:PSDensity <numeric_value> {<amplitude_units>}
      • :CALCulate:CHPower:LIMit:PSDensity:STATe <0 | 1 | ON | OFF>
      • :CALCulate:CHPower:LIMit:PSD:FAIL?
      • :CALCulate:CHPower:LIMit:STATe <0 | 1 | ON | OFF>
      • :CALCulate:CINTerference:CARrier:LIMit <numeric_value> {<amplitude_units>}
      • :CALCulate:CINTerference:CARrier:LIMit:FAIL?
      • :CALCulate:CINTerference:CARrier:LIMit:STATe <0 | 1 | ON | OFF>
      • :CALCulate:CINTerference:CIRatio:LIMit <numeric_value> {DB}
      • :CALCulate:CINTerference:CIRatio:LIMit:FAIL?
      • :CALCulate:CINTerference:CIRatio:LIMit:STATe <0 | 1 | ON | OFF>
      • :CALCulate:CINTerference:INTerference:LIMit <numeric_value> {<amplitude_units>}
      • :CALCulate:CINTerference:INTerference:LIMit:FAIL?
      • :CALCulate:CINTerference:INTerference:LIMit:STATe <0 | 1 | ON | OFF>
      • :CALCulate:EIRPower:HORizontal:LIMit:FAIL?
      • :CALCulate:EIRPower:HORizontal:SAVE
      • :CALCulate:EIRPower:LIMit:FAIL?
      • :CALCulate:EIRPower:LIMit:LOWer <numeric_value> {<amplitude_units>}
      • :CALCulate:EIRPower:LIMit:LOWer:STATe <0 | 1 | ON | OFF>
      • :CALCulate:EIRPower:LIMit:UPPer <numeric_value> {<amplitude_units>}
      • :CALCulate:EIRPower:LIMit:UPPer:STATe <0 | 1 | ON | OFF>
      • :CALCulate:EIRPower:MAXimum:LIMit:FAIL?
      • :CALCulate:EIRPower:SUM:LIMit:FAIL?
      • :CALCulate:EIRPower:VERTical:LIMit:FAIL?
      • :CALCulate:EIRPower:VERTical:SAVE
      • :CALCulate:LIMit<n>:ENVelope:UPDate:Y
      • :CALCulate:LIMit<n>:LOWer:ENVelope:CREate
      • :CALCulate:LIMit<n>:LOWer[:TRACe]:POINts?
      • :CALCulate:LIMit<n>:UPPer:ENVelope:CREate
      • :CALCulate:LIMit<n>:UPPer[:TRACe]:POINts?
      • :CALCulate:LIMit:ALARm <0 | 1 | ON | OFF>
      • :CALCulate:LIMit:ENVelope:OFFSet <numeric_value> {<amplitude_units>}
      • :CALCulate:LIMit:ENVelope:POINt <numeric_value>
      • :CALCulate:LIMit:ENVelope:SHAPe <SQUare|SLOPe>
      • :CALCulate:MARKer<n>:FUNCtion <OFF|NOISe|FCOunter|QUASi>
      • :CALCulate:MARKer<n>:MAXimum
      • :CALCulate:MARKer<n>:MAXimum:LEFT
      • :CALCulate:MARKer<n>:MAXimum:NEXT
      • :CALCulate:MARKer<n>:MAXimum:RIGHt
      • :CALCulate:MARKer<n>:MODE <POSition|DELTa|FIXed>
      • :CALCulate:MARKer<n>:MOVE:LEFT
      • :CALCulate:MARKer<n>:MOVE:RIGHt
      • :CALCulate:MARKer<n>:REFerence <numeric_value>
      • :CALCulate:MARKer<n>[:SET]:CENTer
      • :CALCulate:MARKer<n>[:SET]:RLEVel
      • :CALCulate:MARKer<n>:STATe <0 | 1 | ON | OFF>
      • :CALCulate:MARKer<n>:TRACe <numeric_value>
      • :CALCulate:MARKer<n>:X <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • :CALCulate:MARKer<n>:X <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • :CALCulate:MARKer<n>:Y <numeric_value> {<amplitude_units>}
      • :CALCulate:MARKer:AOFF
      • :CALCulate:MARKer:APReset
      • :CALCulate:MARKer[:DATA]:ALL?
      • :CALCulate:MARKer:FUNCtion:FCOunter:RESolution <R0|R1|R2|R3>
      • :CALCulate:MARKer:PEAK:EXCursion <numeric_value> {DB}
      • :CALCulate:MARKer:PEAK:EXCursion:STATe <0 | 1 | ON | OFF>
      • :CALCulate:MARKer:PEAK:THReshold <numeric_value> {<amplitude_units>}
      • :CALCulate:MARKer:PEAK:THReshold:STATe <0 | 1 | ON | OFF>
      • :CALCulate:OBW:LIMit <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • :CALCulate:OBW:LIMit:FAIL?
      • :CALCulate:OBW:LIMit:STATe <0 | 1 | ON | OFF>
      • :CONFigure:ACPower
      • :CONFigure:CHPower
      • :CONFigure:CINTerference
      • :CONFigure:EIRPower
      • :CONFigure:OBWidth
      • :CONFigure:SEMask
      • :CONFigure:USER:CARRiers[:STATe] <0 | 1 | ON | OFF>
      • :CONFigure:USER:COUNtries[:STATe] <0 | 1 | ON | OFF>
      • :CSCanner:ADD:CUSTom <numeric_value> {HZ | KHZ | MHZ | GHZ},<numeric_value> {HZ | KHZ | MHZ | GHZ},[<numeric_value>],[<string>],[<numeric_value> {PS | NS | US | MS | S | MIN | HR}],[<numeric_value> {<amplitude_units>}],[<numeric_value> {<amplitude_units>}]
      • :CSCanner:ADD:FREQuency <numeric_value> {HZ | KHZ | MHZ | GHZ},<numeric_value> {HZ | KHZ | MHZ | GHZ},<numeric_value> {HZ | KHZ | MHZ | GHZ},<numeric_value>,[<numeric_value>],[<string>],[<numeric_value> {PS | NS | US | MS | S | MIN | HR}],[<numeric_value> {<amplitude_units>}],[<numeric_value> {<amplitude_units>}]
      • :CSCanner:ADD:SIGnalstandard <string>,<numeric_value>,<numeric_value>,<numeric_value>,[<numeric_value>],[<numeric_value> {HZ | KHZ | MHZ | GHZ}],[<numeric_value> {PS | NS | US | MS | S | MIN | HR}],[<numeric_value> {<amplitude_units>}],[<numeric_value> {<amplitude_units>}]
      • :CSCanner:AVERage:TYPE <LAST|MAX|MIN|AVER|RMAX|RMIN|RAV>
      • :CSCanner:CHANnel?
      • :CSCanner:CHANnel:LIMit?
      • :CSCanner:CLEar <numeric_value>
      • :CSCanner:CLEar:ALL
      • :CSCanner:DELete <numeric_value>
      • :CSCanner:DELete:ALL
      • :CSCanner:EDIT:CUSTom <numeric_value> {HZ | KHZ | MHZ | GHZ},<numeric_value> {HZ | KHZ | MHZ | GHZ},<numeric_value>,[<string>],[<numeric_value> {PS | NS | US | MS | S | MIN | HR}],[<numeric_value> {<amplitude_units>}],[<numeric_value> {<amplitude_units>}]
      • :CSCanner:EDIT:SIGnalstandard <string>,<numeric_value>,<numeric_value>,[<numeric_value> {HZ | KHZ | MHZ | GHZ}],[<numeric_value> {PS | NS | US | MS | S | MIN | HR}],[<numeric_value> {<amplitude_units>}],[<numeric_value> {<amplitude_units>}]
      • :CSCanner:LOG <0 | 1 | ON | OFF>
      • :CSCanner:LOG:INTerval <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • :CSCanner:RESults? [<ALL|STRip|BAR>],[<numeric_value>]
      • :CSCanner:SORT:ASC <CFR|BWID|DTIM|LIMI|LAST|MAX|MIN|AVER|RMAX|RMIN|RAV>
      • :CSCanner:SORT:DESC <CFR|BWID|DTIM|ULIM|LLIM|LAST|MAX|MIN|AVER|RMAX|RMIN|RAV>
      • :CSCanner:SSTandard:ATTRibutes? <string>
      • :CSCanner:SSTandard:CATalog?
      • :CSCanner:UPDate:STATe <0 | 1 | ON | OFF>
      • :DIAGnostic:SWEep:TIME?
      • :DISPlay:EXTernal:DEVices?
      • :DISPlay:IMPedance:MATCh:DEVice <NONe|M75|OTHer>
      • :DISPlay:IMPedance:MATCh:DEVice:CUSTom:LOSS <numeric_value> {DB}
      • :DISPlay:POINtcount <numeric_value>
      • :DISPlay:VIEW:SPECtrogram:AADJust
      • :DISPlay:VIEW:SPECtrogram:BOTTom <numeric_value> {<amplitude_units>}
      • :DISPlay:VIEW:SPECtrogram:HISTory[:DATA]? <numeric_value>
      • :DISPlay:VIEW:SPECtrogram:HISTory:ELAPsed? <numeric_value>
      • :DISPlay:VIEW:SPECtrogram:HUE <numeric_value>
      • :DISPlay:VIEW:SPECtrogram:REFerence <numeric_value> {<amplitude_units>}
      • :DISPlay:VIEW:SPECtrogram:TRACe:SELection <POSition|TIME>
      • :DISPlay:WINDow:TRACe:Y[:SCALe]:PDIVision <numeric_value>
      • :DISPlay:WINDow:TRACe:Y[:SCALe]:PDIVision <numeric_value>
      • :DISPlay[:WINDow]:TRACe:Y:SCALe:RLEVel <numeric_value> {<amplitude_units>}
      • :DISPlay[:WINDow]:TRACe:Y[:SCALe]:RLEVel:AUTO[:IMMediate] <numeric_value> {DB}
      • :DISPlay[:WINDow]:TRACe:Y[:SCALe]:RLEVel:OFFSet <numeric_value> {DB}
      • :DISPlay[:WINDow]:TRACe:Y[:SCALe]:RLEVel:OFFSet <numeric_value> {DB}
      • :DISPlay[:WINDow]:TRACe:Y:SSCale:PDIVision <numeric_value> {DB}
      • :DISPlay[:WINDow]:TRACe:Y:SSCale:PDIVision <numeric_value> {DB}
      • :DISPlay[:WINDow]:TRACe:Y:SSCale:RLEVel <numeric_value> {DB}
      • :DISPlay[:WINDow]:TRACe:Y:SSCale:RLEVel <numeric_value> {DB}
      • :FETCh:ACPower?
      • :FETCh:AMPLitude? <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • :FETCh:BPOWer?
      • :FETCh:CAGGregation?
      • :FETCh:CHPower?
      • :FETCh:CHPower:CHPower?
      • :FETCh:CHPower:DENSity?
      • :FETCh:CINTerference?
      • :FETCh:CINTerference:CIRAtio?
      • :FETCh:CINTerference:CPOWer?
      • :FETCh:CINTerference:IPOWer?
      • :FETCh:CONStellation:PBCH?
      • :FETCh:CONStellation:PDSCh?
      • :FETCh:CONTrol?
      • :FETCh[:DATA]:ALL? [<ASCii|INTeger|REAL>],[<numeric_value>]
      • :FETCh:DENSity:DATA? <numeric_value>
      • :FETCh:EIRPower?
      • :FETCh:EIRPower:DATA?
      • :FETCh:EIRPower:MAXimum?
      • :FETCh:FRAMe:POWer?
      • :FETCh:MIMO:ANTennas?
      • :FETCh:OBWidth<n>?
      • :FETCh:PANalyzer?
      • :FETCh:PCI?
      • :FETCh:PDSCh?
      • :FETCh:PEAK?
      • :FETCh:RRM?
      • :FETCh:SCANner?
      • :FETCh:SEMask?
      • :FETCh:SSB?
      • :FETCh:SYNC:EVM?
      • :FETCh:SYNC:POWer?
      • :FETCh:TAE?
      • :FETCh:TRACe:STAT?
      • :FETCh:WCDMa:SYNC?
      • :FORMat[:TRACe][:DATA] <ASCii|INTeger|REAL>,[<numeric_value>]
      • :FRAMe:SPECtrum:TRACe:DISPlay[:STATe] <0 | 1 | ON | OFF>
      • :FRAMe:SPECtrum:TRACe:TYPE <NORMal|MINimum|MAXimum|AVERage|RMAXimum|RMINimum|RAVerage|MATH>
      • :FRAMe:SPECtrum:TRACe:UPDate[:STATe] <0 | 1 | ON | OFF>
      • :FRAMe:TDOMain:TRACe:DISPlay[:STATe] <0 | 1 | ON | OFF>
      • :FRAMe:TDOMain:TRACe:TYPE <NORMal|MINimum|MAXimum|AVERage|RMAXimum|RMINimum|RAVerage|MATH>
      • :FRAMe:TDOMain:TRACe:UPDate[:STATe] <0 | 1 | ON | OFF>
      • :INITiate:CONTinuous <0 | 1 | ON | OFF>
      • :INITiate[:IMMediate]
      • :INITiate[:IMMediate]:ALL
      • :INITiate:SPA:SELFtest?
      • :INSTrument:ACTive:STATe <0 | 1 | ON | OFF>
      • :INSTrument:REMote:STATe <0 | 1 | ON | OFF>,<string>
      • :MEASure:ACPower?
      • :MEASure:CHPower?
      • :MEASure:CHPower:CHPower?
      • :MEASure:CHPower:DENSity?
      • :MEASure:CINTerference:CANCel
      • :MEASure:CINTerference:CONTinue
      • :MEASure:IQ:CAPTure [<PPS>]
      • :MEASure:IQ:CAPTure:FAIL <OFF|FIRSt|REPeat>
      • :MMEMory:COEvent:CLEarall
      • :MMEMory:COEvent:TIMer:INTerval <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • :MMEMory:LOAD:LIMit <string>,<string>,<string>
      • :MMEMory:LOAD:RAM <numeric_value>,<numeric_value>,<string>
      • :MMEMory:LOAD:RECord <string>,<string>
      • :MMEMory:LOAD:SEMask:CUSTom <string>,<string>
      • :MMEMory:STOEvent:CLEarall
      • :MMEMory:STOEvent:EOSWeep:MODE <CONTinuous|SINGle>
      • :MMEMory:STOEvent:EOSWeep[:STATe] <0 | 1 | ON | OFF>
      • :MMEMory:STOEvent:LIMit:INTerval <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • :MMEMory:STOEvent:LIMit:MODE <CONTinuous|SINGle|INTerval>
      • :MMEMory:STOEvent:LIMit:PTRigger[:STATe] <0 | 1 | ON | OFF>
      • :MMEMory:STOEvent:LIMit[:STATe] <0 | 1 | ON | OFF>
      • :MMEMory:STOEvent:TIMer:INTerval <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • :MMEMory:STOEvent:TIMer[:STATe] <0 | 1 | ON | OFF>
      • :MMEMory:STORe:CAPTure
      • :MMEMory:STORe:CAPTure:MODE <AUTomatic|MANual>
      • :MMEMory:STORe:CAPTure:MSUS <string>
      • :MMEMory:STORe:CAPTure:PATH <string>
      • :MMEMory:STORe:CAPTure:PREFix <string>
      • :MMEMory:STORe:CSCanner:CSV:MSUS <string>
      • :MMEMory:STORe:CSCanner:CSV:PATH <string>
      • :MMEMory:STORe:LIMit <string>,<string>,<string>
      • :MMEMory:STORe:RAM <numeric_value>,<numeric_value>,<string>
      • :MMEMory:STORe:RECord:CSV:DISCard
      • :MMEMory:STORe:RECord:CSV:MSUS <string>
      • :MMEMory:STORe:RECord:CSV:PATH <string>
      • :MMEMory:STORe:RECord:CSV:PREFix <string>
      • :MMEMory:STORe:RECord:MSUS <string>
      • :MMEMory:STORe:RECord:PATH <string>
      • :MMEMory:STORe:RECord:PREFix <string>
      • :MMEMory:STORe:STREam:MSUS <string>
      • :MMEMory:STORe:STREam:PATH <string>
      • :MMEMory:STORe:TRACe:CSV <string>,<string>,<string>
      • :OUTPut:IF:FILTer <K750|M7P5|M14|M30|M100|K40|K800|M5P5|M20|M40>
      • :OUTPut:IF:STATe <0 | 1 | ON | OFF>
      • :READ:ACPower?
      • :READ:CHPower?
      • :READ:CHPower:CHPower?
      • :READ:CHPower:DENSity?
      • :READ:EIRPower?
      • :READ:EIRPower:DATA?
      • :READ:EIRPower:MAXimum?
      • :READ:SEMask?
      • [:SENSe]:ACPower:BANDwidth|BWIDth:ADJacent <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • [:SENSe]:ACPower:BANDwidth|BWIDth:ALTernate <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • [:SENSe]:ACPower:BANDwidth|BWIDth:MAIN <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • [:SENSe]:ACPower:BANDwidth|BWIDth:SPACing <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • [:SENSe]:ACPower:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:AMFM:AUDio:RECord
      • [:SENSe]:AMFM:AUDio:RECord:DURation <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • [:SENSe]:AMFM:AUDio:RESults?
      • [:SENSe]:AMFM:AUDio:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:AMFM:DEMod:BWIDth?
      • [:SENSe]:AMFM:DEMod:FREQuency <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • [:SENSe]:AMFM:DEMod:MARKer:SELect <numeric_value>
      • [:SENSe]:AMFM:DEMod:MARKer:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:AMFM:DEMod:TYPE <AM|USBand|LSBand|FMWideband|FMNarrowband|FM125|FM625>
      • [:SENSe]:AMFM:SQUelch <numeric_value> {<amplitude_units>}
      • [:SENSe]:AMFM:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:ARFChannel <numeric_value>
      • [:SENSe]:AVERage:COUNt <numeric_value>
      • [:SENSe]:AVERage:TYPE <NORMal|MINimum|MAXimum|AVERage|RMAXimum|RMINimum|RAVerage|MATH>
      • [:SENSe]:BANDwidth|BWIDth[:RESolution] <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • [:SENSe]:BANDwidth|BWIDth[:RESolution] <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • [:SENSe]:BANDwidth|BWIDth[:RESolution]:RATio <numeric_value>
      • [:SENSe]:BANDwidth|BWIDth:VIDeo <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • [:SENSe]:BANDwidth|BWIDth:VIDeo <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • [:SENSe]:BANDwidth|BWIDth:VIDeo:RATio <numeric_value>
      • [:SENSe]:BANDwidth|BWIDth:VIDeo:TYPE <LINear|LOGarithmic>
      • [:SENSe]:BANDwidth[:RESolution]:AUTO <0 | 1 | ON | OFF>
      • [:SENSe]:BANDwidth:VIDeo:AUTO <0 | 1 | ON | OFF>
      • [:SENSe]:BEAM <numeric_value>
      • [:SENSe]:BEAM:TRACking:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:BPOWer:END <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • [:SENSe]:BPOWer:STARt <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • [:SENSe]:BPOWer:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:CAGGregation?
      • [:SENSe]:CAGGregation:CARRier:ACTive <numeric_value>
      • [:SENSe]:CAGGregation:CARRier:COUNt <numeric_value>
      • [:SENSe]:CAGGregation:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:CBWidth <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • [:SENSe]:CBWidth <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • [:SENSe]:CBWidth:CATalog?
      • [:SENSe]:CCHannel:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:CHANnel:SCSPacing:CATalog?
      • [:SENSe]:CHPower:BANDwidth|BWIDth:INTegration <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • [:SENSe]:CHPower:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:CINTerference:BANDwidth|BWIDth:INTegration <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • [:SENSe]:CINTerference:CARRier:STATe?
      • [:SENSe]:CINTerference:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:CLOCk:ADJust <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • [:SENSe]:CONStellation <PBCH|PDSCh>
      • [:SENSe]:CONStellation:PBCH?
      • [:SENSe]:CONStellation:PBCH:BEAM <numeric_value>
      • [:SENSe]:CONStellation:PDSCh?
      • [:SENSe]:CONStellation:REFerence:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:CONStellation:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:CYCLicprefix <NORMal|EXTended|AUTO>
      • [:SENSe]:CYCLicprefix <NORMal|EXTended|AUTO>
      • [:SENSe]:DEMod:DISCard:CSV
      • [:SENSe]:DEMod:GATE:DURation <COUPled|FRAMe>
      • [:SENSe]:DEMod:GATE:SPECtrum:TYPe <UPLink|DWLink|FLEXible|GP|ALL|NONe>
      • [:SENSe]:DEMod:LOG <LOG|PAUSe|STOP>
      • [:SENSe]:DEMod:STORe:MSUS <string>
      • [:SENSe]:DEMod:STORe:PATH <string>
      • [:SENSe]:DENSity:ACQuisition <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • [:SENSe]:DENSity:CSCale:AUTO <0 | 1 | ON | OFF>
      • [:SENSe]:DENSity:CSCale:HIGH <numeric_value>
      • [:SENSe]:DENSity:CSCale:LOW <numeric_value>
      • [:SENSe]:DENSity:DETection:MINimum?
      • [:SENSe]:DENSity:DISPlay:RESolution <NORMal|HIGH>
      • [:SENSe]:DENSity:FFT:COUNt?
      • [:SENSe]:DENSity:PERSistence <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • [:SENSe]:DENSity:PERSistence:CLEar
      • [:SENSe]:DENSity:PERSistence:STATe <VARiable|INFinite>
      • [:SENSe]:DENSity:POI?
      • [:SENSe]:DENSity:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:DETector[:FUNCtion] <POSitive|RMS|NEGative|SAMPle|NORMal>
      • [:SENSe]:DF:INFormation?
      • [:SENSe]:DUPLex <FDD|TDD>
      • [:SENSe]:EARFchannel <numeric_value>
      • [:SENSe]:EIRPower:CLOSs <numeric_value> {DB}
      • [:SENSe]:EIRPower:DISTance <numeric_value>
      • [:SENSe]:EIRPower:DISTance:UNIT <METers|FEET>
      • [:SENSe]:EIRPower:MAXimum:COUNt?
      • [:SENSe]:EIRPower:MAXimum:RESet
      • [:SENSe]:EIRPower:PLOSs?
      • [:SENSe]:EIRPower:RAGain <numeric_value> {DB}
      • [:SENSe]:EIRPower:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:EIRPower:SUM:RESet
      • [:SENSe]:EIRPower:TAGain <numeric_value> {DB}
      • [:SENSe]:FETch:THD?
      • [:SENSe]:FPAView <FRAMe|SUBFrame|SLOT>
      • [:SENSe]:FRAMe:POWer:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:FREQuency:CENTer <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • [:SENSe]:FREQuency:CENTer:SHARe <0 | 1 | ON | OFF>
      • [:SENSe]:FREQuency:LIMit?
      • [:SENSe]:FREQuency:OFFSet <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • [:SENSe]:FREQuency:SPAN <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • [:SENSe]:FREQuency:SPAN:FULL
      • [:SENSe]:FREQuency:SPAN:LAST
      • [:SENSe]:FREQuency:STARt <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • [:SENSe]:FREQuency:STEP[:INCRement] <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • [:SENSe]:FREQuency:STOP <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • [:SENSe]:FREQuency:SWEep:TIME <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • [:SENSe]:FREQuency:SWEep:TIMe:AUTO <0 | 1 | ON | OFF>
      • [:SENSe]:FSTRength:ANTenna <string>
      • [:SENSe]:FSTRength:ANTenna:FACTor?
      • [:SENSe]:FSTRength:ANTenna:FILE <block data>
      • [:SENSe]:FSTRength:ANTenna:LIST?
      • [:SENSe]:FSTRength:ANTenna:LIST:USER?
      • [:SENSe]:FSTRength:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:FSTRength:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:GATE:DELay <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • [:SENSe]:GATE:DLSLots[:ONE] <numeric_value>
      • [:SENSe]:GATE:DLSLots:TWO <numeric_value>
      • [:SENSe]:GATE:DLSYmbols[:ONE] <numeric_value>
      • [:SENSe]:GATE:DLSYmbols:TWO <numeric_value>
      • [:SENSe]:GATE:FRAMe:OFFSet <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • [:SENSe]:GATE:FRAMe:STARttime <AUTO|SYNO|UTC|UTC3pos|UTC2neg|CUSTom>
      • [:SENSe]:GATE:FRAMe:STARttime:FORCe
      • [:SENSe]:GATE:FRAMestructure <A|B1|B2|CUSTom>
      • [:SENSe]:GATE:FRAMestructure:SSTYpe <TYP1|TYP2>
      • [:SENSe]:GATE:LENGth <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • [:SENSe]:GATE:PERiod <P1s|P20ms|P10ms>
      • [:SENSe]:GATE:PERIodicity[:ONE] <M0P5|M0P625|M1P0|M1P25|M2P0|M2P5|M3P0|M4P0|M5P0|M10P0|NONE>
      • [:SENSe]:GATE:PERIodicity:TWO <M0P5|M0P625|M1P0|M1P25|M2P0|M2P5|M3P0|M4P0|M5P0|M10P0|NONE>
      • [:SENSe]:GATE:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:GATE:TRIGger <GPS|EXT1|EXT2|EXT>
      • [:SENSe]:GATE:ULSLots[:ONE] <numeric_value>
      • [:SENSe]:GATE:ULSLots:TWO <numeric_value>
      • [:SENSe]:GATE:ULSYmbols[:ONE] <numeric_value>
      • [:SENSe]:GATE:ULSYmbols:TWO <numeric_value>
      • [:SENSe]:GSCNumber <numeric_value>
      • [:SENSe]:IQ:BITS <F32|I32|I16|A16|I10|I8>
      • [:SENSe]:IQ:CONCatenate[:STATe] <0 | 1 | ON | OFF>
      • [:SENSe]:IQ:DISCard
      • [:SENSe]:IQ:FPGA:SWITch <PCIe|IQC>
      • [:SENSe]:IQ:LENGth <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • [:SENSe]:IQ:LENGth:MAX?
      • [:SENSe]:IQ:MEMory?
      • [:SENSe]:IQ:MEMory:STREam?
      • [:SENSe]:IQ:METadata?
      • [:SENSe]:IQ:MODE <SINGle|STREam|CONTinuous>
      • [:SENSe]:IQ:PORT <DATaout|USB|ETHernet>
      • [:SENSe]:IQ:PORT:DATAout?
      • [:SENSe]:IQ:SAMPle <SB0|SB1|SB2|SB3|SB4|SB5|SB6|SB7|SB8|SB9|SB10|SB11|SB12|SB13|SB14|SB15|SB16|SB17|SB18|SB19|SB20>
      • [:SENSe]:IQ:SAMPle:CALibration:CONFiguration?
      • [:SENSe]:IQ:SAMPle:CONFiguration?
      • [:SENSe]:IQ:SAVE:PROGress?
      • [:SENSe]:IQ:SIGNing <0 | 1 | ON | OFF>
      • [:SENSe]:IQ:STATus?
      • [:SENSe]:IQ:TIMEstamps <0 | 1 | ON | OFF>
      • [:SENSe]:ISOTropic:AXIS <X|Y|Z|NONE>
      • [:SENSe]:ISOTropic:FACTors?
      • [:SENSe]:ISOTropic:INFOrmation?
      • [:SENSe]:LTE:CFI <AUTO|CFI1|CFI2|CFI3>
      • [:SENSe]:LTE:OBANd <INValid|UL1|DL1|UL2|DL2|UL3|DL3|UL4|DL4|UL5|DL5|UL6|DL6|UL7|DL7|UL8|DL8|UL9|DL9|UL10|DL10|UL11|DL11|UL12|DL12|UL13|DL13|UL14|DL14|UL17|DL17|UL18|DL18|UL19|DL19|UL20|DL20|UL21|DL21|UL22|DL22|UL23|DL23|UL24|DL24|UL25|DL25|UL26|DL26|UL27|DL27|UL28|DL28|DL29|UL30|DL30|UL31|DL31|DL32|UL33|DL33|UL34|DL34|UL35|DL35|UL36|DL36|UL37|DL37|UL38|DL38|UL39|DL39|UL40|DL40|UL41|DL41|UL42|DL42|UL43|DL43|UL44|DL44|UL45|DL45|UL46|DL46|UL47|DL47|UL48|DL48|UL49|DL49|UL50|DL50|UL51|DL51|UL52|DL52|UL53|DL53|UL54|DL54|UL65|DL65|UL66|DL66|DL67|UL68|DL68|DL69|UL70|DL70|UL71|DL71|UL72|DL72|UL73|DL73|UL74|DL74|DL75|DL76|UL85|DL85|UL87|DL87|UL88|DL88|U103|D103|U106|D106>
      • [:SENSe]:MIMO:ANTenna:PORT <AUTO|ANT0|ANT1|ANT2|ANT3>
      • [:SENSe]:MODE <SPECtrum|NRADio|LTE|PANanlyer|RTSA>
      • [:SENSe]:MODE:CATalog?
      • [:SENSe]:MODulation:REFerence?
      • [:SENSe]:MODulation:TYPE <ALL|QPSK|Q16|Q64|Q256>
      • [:SENSe]:NGFactor <ONESixth|HALF|ONE|TWO>
      • [:SENSe]:NRADio:MAPPing:PATTern <P1|P2|AUTO>
      • [:SENSe]:OBANd <INValid|GLOBal|N1|N2|N3|N5|N7|N8|N12|N13|N14|N18|N20|N24|N25|N26|N28|N29|N30|N34|N38|N39|N40|N41|N46|N48|N50|N51|N53|N54|N65|N66|N67|N70|N71|N74|N75|N76|N77|N78|N79|N85|N90|N91|N92|N93|N94|N96|N100|N101|N102|N104|N105|N257|N258|N259|N260|N261|N262|N263>
      • [:SENSe]:OBWidth:METHod <XDB|PERCent>
      • [:SENSe]:OBWidth:PERCent <numeric_value>
      • [:SENSe]:OBWidth:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:OBWidth:XDB <numeric_value> {DB}
      • [:SENSe][:OTA]:MAPPing:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:PANalyzer?
      • [:SENSe]:PANalyzer:ALL?
      • [:SENSe]:PCI?
      • [:SENSe]:POWer:RF:ATTenuation <numeric_value> {DB}
      • [:SENSe]:POWer:RF:ATTenuation <numeric_value> {DB}
      • [:SENSe]:POWer:RF:ATTenuation:AUTO <0 | 1 | ON | OFF>
      • [:SENSe]:POWer:RF:ATTenuation:AUTO <0 | 1 | ON | OFF>
      • [:SENSe]:POWer:RF:GAIN:AUTO <0 | 1 | ON | OFF>
      • [:SENSe]:POWer:RF:GAIN:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:POWer:RF:GAIN:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:PULSe:LABel:ALL:OFF
      • [:SENSe]:PULSe:LABel:ALL:ON
      • [:SENSe]:PULSe:LABel:INSTant:CENTer <0 | 1 | ON | OFF>
      • [:SENSe]:PULSe:LABel:INSTant:REFerence:DURation:FIRSt <0 | 1 | ON | OFF>
      • [:SENSe]:PULSe:LABel:INSTant:REFerence:DURation:SECond <0 | 1 | ON | OFF>
      • [:SENSe]:PULSe:LABel:INSTant:REFerence:HIGH:FIRSt <0 | 1 | ON | OFF>
      • [:SENSe]:PULSe:LABel:INSTant:REFerence:HIGH:SECond <0 | 1 | ON | OFF>
      • [:SENSe]:PULSe:LABel:INSTant:REFerence:LOW:FIRSt <0 | 1 | ON | OFF>
      • [:SENSe]:PULSe:LABel:INSTant:REFerence:LOW:SECond <0 | 1 | ON | OFF>
      • [:SENSe]:PULSe:LABel:INSTant:TRANsition:POST:ABERration <0 | 1 | ON | OFF>
      • [:SENSe]:PULSe:LABel:INSTant:TRANsition:POST:OVER <0 | 1 | ON | OFF>
      • [:SENSe]:PULSe:LABel:INSTant:TRANsition:POST:UNDer <0 | 1 | ON | OFF>
      • [:SENSe]:PULSe:LABel:INSTant:TRANsition:PRE:ABERration <0 | 1 | ON | OFF>
      • [:SENSe]:PULSe:LABel:INSTant:TRANsition:PRE:OVER <0 | 1 | ON | OFF>
      • [:SENSe]:PULSe:LABel:INSTant:TRANsition:PRE:UNDer <0 | 1 | ON | OFF>
      • [:SENSe]:PULSe:LABel:LEVel:REFerence:DURation <0 | 1 | ON | OFF>
      • [:SENSe]:PULSe:LABel:LEVel:REFerence:HIGH <0 | 1 | ON | OFF>
      • [:SENSe]:PULSe:LABel:LEVel:REFerence:LOW <0 | 1 | ON | OFF>
      • [:SENSe]:PULSe:LABel:LEVel:STATe:HIGH <0 | 1 | ON | OFF>
      • [:SENSe]:PULSe:LABel:LEVel:STATe:LOW <0 | 1 | ON | OFF>
      • [:SENSe]:PULSe:LEVel:TYPE <AUTO|USER>
      • [:SENSe]:PULSe:LEVel:USER:BOTTom <numeric_value> {<amplitude_units>}
      • [:SENSe]:PULSe:LEVel:USER:TOP <numeric_value> {<amplitude_units>}
      • [:SENSe]:PULSe:REFerence:DURation <percent_value>
      • [:SENSe]:PULSe:REFerence:HIGH <percent_value>
      • [:SENSe]:PULSe:REFerence:LOW <percent_value>
      • [:SENSe]:PULSe:SIMulation:AMPLitude:HIGH <numeric_value> {<amplitude_units>}
      • [:SENSe]:PULSe:SIMulation:AMPLitude:LOW <numeric_value> {<amplitude_units>}
      • [:SENSe]:PULSe:SIMulation:DUTY <numeric_value>
      • [:SENSe]:PULSe:SIMulation:PERiod <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • [:SENSe]:PULSe:SIMulation:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:PULSe:SIMulation:WAVeform <SPOStive|SNEGative|TRAin|DOUBle>
      • [:SENSe]:PULSe:TYPE <POSitive|NEGative>
      • [:SENSe]:SCANner?
      • [:SENSe]:SCANner:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:SEMask:CENTer:BWIDth <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • [:SENSe]:SEMask:MASK <GT38|LT38|W43|W41|W35|W31|WK43|WK41|WK35|WK31|LK24|LK22|LK20|NK38|NK35|NK28|NK24|CUSTom>
      • [:SENSe]:SEMask:MASK:CUSTom <string>,<block data>
      • [:SENSe]:SEMask:MASK:TYPe?
      • [:SENSe]:SEMask:RPOWer <numeric_value> {<amplitude_units>}
      • [:SENSe]:SEMask:RPOWer:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:SEMask:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:SIB:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:SSB?
      • [:SENSe]:SSB:FREQuency <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • [:SENSe]:SSB:OFFSet <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • [:SENSe]:SSB:OFFSet:AUTO:ABORt
      • [:SENSe]:SSB:OFFSet:AUTO:STARt
      • [:SENSe]:SSB:OFFSet:AUTO:STATus?
      • [:SENSe][:SSB]:SCSPacing <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • [:SENSe][:SSB]:SCSPacing:CATalog?
      • [:SENSe]:STATistics:CLEar
      • [:SENSe]:SUBFrame <numeric_value>
      • [:SENSe]:SUBFrame:CONFiguration <AUTO|SSF0|SSF1|SSF2|SSF3|SSF4|SSF5|SSF6|SSF7|SSF8|SSF9|INValid>
      • [:SENSe]:SUBFrame:SLOT <numeric_value>
      • [:SENSe]:SWEep:TIME <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • [:SENSe]:SYNCtype <SS>
      • [:SENSe]:TDOMain:DISPlay:LENGth <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • [:SENSe]:TDOMain:DISPlay:STARt <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • [:SENSe]:TDOMain:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:TDOMain:TRACe[:DATa]? [<ASCii|INTeger|REAL>],[<numeric_value>]
      • [:SENSe]:TDOMain:TRACe:DETector[:FUNCtion] <POSitive|RMS|NEGative|SAMPle|NORMal>
      • [:SENSe]:TDOMain:TRACe:DISPlay[:STATe] <0 | 1 | ON | OFF>
      • [:SENSe]:TDOMain:TRACe:TYPE <NORMal|MINimum|MAXimum|AVERage|RMAXimum|RMINimum|RAVerage|MATH>
      • [:SENSe]:TDOMain:TRACe:UPDate[:STATe] <0 | 1 | ON | OFF>
      • [:SENSe]:THD:FREQuency:FUNDamental <numeric_value> {HZ | KHZ | MHZ | GHZ}
      • [:SENSe]:THD:FREQuency:FUNDamental:AUTO <0 | 1 | ON | OFF>
      • [:SENSe]:THD:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:UPDown:CONFig <numeric_value>
      • [:SENSe]:WCDMa:DEMod:CPICh <numeric_value> {<amplitude_units>}
      • [:SENSe]:WCDMa:DEMod:CPICh:STATe <0 | 1 | ON | OFF>
      • [:SENSe]:WCDMa:DEMod:PICH:CODE <numeric_value>
      • [:SENSe]:WCDMa:DEMod:SCCPch:CODE <numeric_value>
      • [:SENSe]:WCDMa:DEMod:SCCPch:SFACtor <string>
      • [:SENSe]:WCDMa:DEMod:SCODe <numeric_value>
      • [:SENSe]:WCDMa:DEMod:SCODe:AUTO <0 | 1 | ON | OFF>
      • [:SENSe]:WCDMa:DEMod:SFACtor <string>
      • [:SENSe]:WCDMa:DEMod:THRShold <numeric_value> {DB}
      • [:SENSe]:WCDMa:DEMod:THRShold:AUTO <0 | 1 | ON | OFF>
      • [:SENSe]:WCDMa:DEMod:TXPower <numeric_value> {<amplitude_units>}
      • [:SENSe]:WCDMa:SYNC?
      • :STATus:OPERation[:EVENt]?
      • :THReshold:SINR <numeric_value> {DB}
      • :TRACe<n>:IQ:DATA? [<numeric_value>]
      • :TRACe<n>:DETector[:FUNCtion] <POSitive|RMS|NEGative|SAMPle|NORMal>
      • :TRACe<n>:DISPlay[:STATe] <0 | 1 | ON | OFF>
      • :TRACe<n>:DISPlay:VIEW:SPECtrogram:ELAPsed?
      • :TRACe<n>:DISPlay:VIEW:SPECtrogram:POSition <numeric_value>
      • :TRACe<n>:DISPlay:VIEW:SPECtrogram:TIME <numeric_value>
      • :TRACe<n>:NORMalize <0 | 1 | ON | OFF>
      • :TRACe<n>:SWEep:COUNt[:CURRent]?
      • :TRACe<n>:TYPE <NORMal|MINimum|MAXimum|AVERage|RMAXimum|RMINimum|RAVerage|MATH>
      • :TRACe<n>:UPDate[:STATe] <0 | 1 | ON | OFF>
      • :TRACe:CLEar <numeric_value>
      • :TRACe:CLEar:ALL
      • :TRACe[:DATA]? <numeric_value>
      • :TRACe[:DATA]:ALL? [<ASCii|INTeger|REAL>],[<numeric_value>]
      • :TRACe:IQ:DATA:FORMat <PACKed>
      • :TRACe:PLAYback <PLAY|STOP|PAUSe>
      • :TRACe:PLAYback:FILE?
      • :TRACe:PLAYback:INTerval <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • :TRACe:PLAYback:LOOP <0 | 1 | ON | OFF>
      • :TRACe:PLAYback:POSition?
      • :TRACe:PLAYback:SEEK <numeric_value>
      • :TRACe:PLAYback:TAG <NEXT|PREVious|ADD|REMove|ALL>
      • :TRACe:PLAYback:TAGS? [<RECord|PLAYback>]
      • :TRACe:PLAYback:TAG:TABLe <0 | 1 | ON | OFF>
      • :TRACe:PRESet:ALL
      • :TRACe:RECord <RECord|STOP|PAUSe>
      • :TRACe:RECord:CSV:LINK <RECord|PLAYback|OFF>
      • :TRACe:RECord:CSV:STATe <RECord|STOP|PAUSe>
      • :TRACe:RECord:INTerval:MODE <AUTO|MANual>
      • :TRACe:RECord:INTerval:TIME <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • :TRACe:RECord:LINK <0 | 1 | ON | OFF>
      • :TRACe:RECord:MODE <AUTO|TIMed>
      • :TRACe:RECord:TAG
      • :TRACe:RECord:TIME <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • :TRACe:SELect <numeric_value>
      • :TRACe:SPECtrogram:DETector[:FUNCtion] <POSitive|RMS|NEGative|SAMPle|NORMal>
      • :TRACe:SPECtrogram:TYPE <NORMal|MINimum|MAXimum|AVERage|RMAXimum|RMINimum|RAVerage>
      • :TRACe:STATus? <numeric_value>
      • :TRIGger:GATE:SLOPe <POSitive|NEGative>
      • :TRIGger[:SEQuence]:ATRigger <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • :TRIGger[:SEQuence]:ATRigger:STATe <0 | 1 | ON | OFF>
      • :TRIGger[:SEQuence]:DELay <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • :TRIGger[:SEQuence]:DELay:STATe <0 | 1 | ON | OFF>
      • :TRIGger[:SEQuence]:HOLDoff <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • :TRIGger[:SEQuence]:HOLDoff:STATe <0 | 1 | ON | OFF>
      • :TRIGger[:SEQuence]:INTernal:PERiod <numeric_value> {PS | NS | US | MS | S | MIN | HR}
      • :TRIGger[:SEQuence]:SLOPe <POSitive|NEGative>
      • :TRIGger[:SEQuence]:SOURce <EXT1|EXT2|IMMediate|VIDeo|INTernal>
      • :TRIGger[:SEQuence]:VIDeo:HYSTeresis <numeric_value> {DB}
      • :TRIGger[:SEQuence]:VIDeo:LEVel <numeric_value> {<amplitude_units>}
      • :UNIT:CHPower:PSDensity <HZ|MHZ>
      • :UNIT:POWer <DBM|DBM/M2|DBW|DBW/M2|DBV|DBV/M|DBMV|DBMV/M|DBUV|DBUV/M|DBA|DBA/M|V|V/M|A|A/M|W|W/M2|W/CM2>
      • :UNIT:POWer <DBM|DBM/M2|DBW|DBW/M2|DBV|DBV/M|DBMV|DBMV/M|DBUV|DBUV/M|DBA|DBA/M|V|V/M|A|A/M|W|W/M2|W/CM2>
  • SCPI Error Table

MS27201A Remote Spectrum Monitor

SCPI Error Table