Spectrum Analyzer Measurement Guide
:
Spectrum Analyzer Measurements
Spectrum Analyzer Measurements
Introduction
Connecting a Signal Source
Setting Frequency Parameters
Entering Start and Stop Frequencies
Entering a Center Frequency
Using Offset Frequency
Setting the Span
Zero Span IF Output (Option 89)
FREQ / SPAN Menu
GESTURES Menu
FREQ / SPAN Zero Span Menu
IF OUTPUT Menu (Option 89)
Setting Amplitude Parameters
Setting Amplitude Units
Setting Amplitude Reference Level
Setting Amplitude Range and Scale
Reference Level Offset for External Loss or External Gain
Attenuator Functions
Preamplifier
Indications of Excessive Signal Level
Overpower Warning
AMPLITUDE Menu
Field Strength
AMPLITUDE FIELD STRENGTH Menu
Example User Antenna Data
Antenna Calculations
Setting Bandwidth Parameters
Resolution Bandwidth
Video Bandwidth
Setting Frequency Bandwidth
Setting Bandwidth Auto Coupling
BANDWIDTH Menu
Setting Trace Parameters
Traces in RF Spectrum View
Trace Math in RF Spectrum View
Trace Normalization in RF Spectrum View
TRACE Menu (Spectrum View)
Trace Detector Types
Cursors in Spectrogram View
TRACE Menu (Spectrogram View)
TRACE CURSOR Menu
Trace Recording, Playback, and CSV Logging
TRACE RECORD Menu
TRACE PLAYBACK Menu
TRACE CSV LOGGING Menu
Setting Sweep Parameters
Single/Continuous
Trace Points
Sweep Limitations
SWEEP Menu
Gated Sweep (Option 90)
GATED SWEEP Menu
POWER VS TIME Display
GATED SWEEP ON Display
Setting Up Markers
Placing a Normal Marker
Placing a Fixed Marker
Placing a Delta Marker
MARKER Menu
MARKER PEAK SEARCH Menu
Marker Functions
Spectrogram with Cursors and Markers
Marker Table
Setting Up Limit Lines
Simple Limit Line
Limit Line Envelope
LIMIT Menu
LIMIT EDIT Menu
LIMIT MOVE Menu
LIMIT ENVELOPE Menu
Setting Up Triggering
TRIGGER Menu in Zero Span
Setting Up Advanced Measurements
MEASURE Menu
MEASURE Menu (Zero Span)
Burst Average Power
SETUP Menu
IQ CAPTURE Menu (Option 124/126)
IQ STREAMING Menu (Option 125/127)
IQ TRIGGER Menu
IQ Streaming Tool
Channel Power
STATUS PANEL (Channel Power)
SETUP Menu (Channel Power)
Occupied Bandwidth
STATUS PANEL (Occupied BW)
SETUP Menu (Occupied BW)
Adjacent Channel Power
STATUS PANEL (ACP)
SETUP Menu (ACP)
Spectrum Emission Mask
Spectrum Emission Mask Measurement Basic Setup
STATUS PANEL (SEM)
SETUP Menu (SEM)
Example Custom Signal Emission Mask
PIM/Interference (Option 24)
STATUS PANEL (PIM/Interference)
SETUP Menu (PIM/Interference)
Electromagnetic Field (EMF) Measurements (Option 444)
Connecting the Antenna
STATUS PANEL (EMF Measurement)
SETUP Menu (EMF Measurement)
Coverage Mapping (Option 431)
Outdoor Coverage Mapping
Indoor Coverage Mapping
MEASUREMENT Menu (Coverage Mapping)
STATUS PANEL (Coverage Mapping)
SETUP Menu (Coverage Mapping)
COLOR SETUP Menu (Coverage Mapping)
Map Tool
AM/FM Audio (Requires Option 24 or Option 509)
AM/FM Audio – RF Spectrum View
SETUP Menu (AM/FM Audio RF Spectrum)
AM/FM Modulation Measurement (Option 509)
AM/FM Metrics
SETUP Menu (AM/FM Audio – All Measurements View)
STATUS PANEL (AM/FM Audio)
Carrier-to-Interference
STATUS PANEL (C/I)
SETUP Menu (C/I)
SETUP Menu
SETUP Menu (Spectrogram View)
Presetting the Analyzer
PRESET Menu
Saving and Recalling Measurements
Saving a Measurement
Recalling a Measurement
FILE Menu