•  Land Mobile Radio Analyzer and Coverage Measurement Guide
  •  General Information
    • Introduction
    • Product Information, Compliance, and Safety
    • Contacting Anritsu
    • Measurement Guide Overview
    • Selecting a Measurement Mode
    • Multi‑Screen View
    • Coverage Mapping
  •  NBFM Analyzer
    • Introduction
    • Transmitter Analysis Setup
    • Receiver Analysis Setup
    •  NBFM Analyzer Graphs
      • Spectrum Graph
      • Audio Spectrum Graph
      • Audio Waveform Graph
      • Summary Graph
    • NBFM Coverage
    • 20 dB Quieting
    • 12 dB SINAD
    • NBFM Analyzer Menus
    • Frequency Menu
    •  Amplitude Menu
      • Vertical Scale Menu
    •  Setup (1/2) Menu
      • Setup (1/2) Menu (continued)
      • Filters Menu
      • Setup (2/2) Menu
    •  Measurement Menu
      • Display Menu
      • Occ BW Method Menu
      • Quieting Menu
      • SINAD Menu
    • Sweep Menu
    • Measure Menu
    • Trace Menu
    • Limit Menu
    • Other Menus
  •  P25 Analyzer (Option 521)
    • Introduction
    •  Setup Procedure
      • Direct Connect to the Transmitter
      • Over the Air (OTA) Analysis Setup
      • Using the Signal Generator for Receiver or OTA Analysis
    •  P25 Analyzer Graphs
      • Constellation and Linear Constellation
      • Histogram Graph
      • Spectrum Graph
      • Eye Diagram
      • Summary Graph
    •  P25 Control Channel Measurements
      • Decoding Control Channel Measurements
    • P25 Coverage
    • P25 Bit Capture
    • P25 IQ Data
    • P25 Analyzer Menus
    • Frequency Menu
    •  Amplitude Menu
      • Vertical Scale Menu
    • Setup Menu
    •  Measurement Menu
      • Display Menu
      • Control Channel Menu
    • Sweep Menu
    • Measure Menu
    • Trace Menu
    • Limit Menu
    • Other Menus
  •  P25 Phase 2 Analyzer (Option 521)
    • Introduction
    •  Setup Procedure
      • Direct Connect to the Transmitter
      • Over the Air (OTA) Analysis Setup
      • Using the Signal Generator for Receiver or OTA Analysis
    •  P25p2 Analyzer Graphs
      • Linear Constellation
      • Histogram Graph
      • Spectrum Graph
      • Eye Diagram
      • Summary Graphs
      • Power Profile
    • P25p2 Control Measurement
    • P25p2 Coverage
    • P25p2 Bit Capture
    • P25p2 IQ Data
    • P25p2 Analyzer Menus
    • Frequency Menu
    •  Amplitude Menu
      • Vertical Scale Menu
    •  Setup Menu
      • Setup (2/2) Menu
    •  Measurement Menu
      • Display Menu
      • Control Channel Menu
      • Bit Capture Menu
    • Sweep Menu
    • Measure Menu
    • Trace Menu
    • Limit Menu
    • Other Menus
  •  NXDN Analyzer (Option 531)
    • Introduction
    •  Setup Procedure
      • Direct Connect to the Transmitter
      • Over the Air (OTA) Analysis Setup
      • Using the Signal Generator for Receiver or OTA Analysis
    •  NXDN Analyzer Graphs
      • Constellation and Linear Constellation
      • Histogram Graph
      • Spectrum Graph
      • Eye Diagram
      • Summary Graph
    •  NXDN Control Measurement
      • Decoding Control Channel Measurements
    • NXDN Bit Capture
    • NXDN IQ Data
    • NXDN Analyzer Menus
    • Frequency Menu
    •  Amplitude Menu
      • Vertical Scale Menu
    • Setup Menu
    •  Measurement Menu
      • Display Menu
      • Control Channel Menu
    • Sweep Menu
    • Measure Menu
    • Trace Menu
    • Limit Menu
    • Other Menus
  •  dPMR Analyzer (Option 573)
    • Introduction
    •  Setup Procedure
      • Direct Connect to the Transmitter
      • Over the Air (OTA) Analysis Setup
    •  dPMR Analyzer Graphs
      • Constellation and Linear Constellation
      • Histogram Graph
      • Spectrum Graph
      • Eye Diagram
      • Summary Graph
    • dPMR IQ Data
    • dPMR Analyzer Menus
    • Frequency Menu
    •  Amplitude Menu
      • Vertical Scale Menu
    • Setup Menu
    •  Measurement Menu
      • Display Menu
    • Sweep Menu
    • Measure Menu
    • Trace Menu
    • Limit Menu
    • Other Menus
  •  TETRA Analyzer (Option 581)
    • Introduction
    •  Over the Air (OTA) Analysis Setup
      • Using the Signal Generator for Receiver or OTA Analysis
    •  TETRA Analyzer Graphs
      • Constellation
      • Spectrum Graph
      • Eye Diagram
      • Summary and TETRA Summary Graphs
    • TETRA IQ Data
    •  TETRA Base Station Receiver Sensitivity Testing
      • Airbus TB3 TETRA Station (Single Rx/Tx Port)
      • Airbus TB3 TETRA Station (Separate Rx/Tx Ports)
      • Hytera TETRA Station
      • Motorola TETRA Station
      • ETELM TETRA Station
    • TETRA Analyzer Menus
    • Frequency Menu
    •  Amplitude Menu
      • Vertical Scale Menu
    •  Setup Menu
      • Setup (2/2) Menu
    •  Measurement Menu
      • Display Menu
      • BS Sensitivity Menu
    • Sweep Menu
    • Measure Menu
    • Trace Menu
    • Limit Menu
    • Other Menus
  •  DMR Analyzer (Option 591)
    • Introduction
    •  Setup Procedure
      • Direct Connect to the Transmitter
      • Over the Air (OTA) Analysis Setup
      • Using the Signal Generator for Receiver or OTA Analysis
    •  DMR Analyzer Graphs
      • Constellation and Linear Constellation
      • Histogram Graph
      • Spectrum Graph
      • Eye Diagram
      • Summary Graph and DMR Summary Graph
      • Power Profile
    • DMR Bit Capture
    • DMR IQ Data
    •  DMR Repeater Receiver Sensitivity
      • Measuring Receiver Sensitivity Example
    • DMR Analyzer Menus
    • Frequency Menu
    •  Amplitude Menu
      • Vertical Scale Menu
    • Setup Menu
    •  Measurement Menu
      • Display Menu
    • Sweep Menu
    • Measure Menu
    • Trace Menu
    • Limit Menu
    • Other Menus
  •  PTC-ITCR Analyzer (Option 721)
    • Introduction
    •  Setup Procedure
      • Direct Connect to the Transmitter
      • Over-the-Air (OTA) Analysis Setup
      • Using the Signal Generator for Receiver or OTA Analysis
    •  PTC-ITCR Analyzer Graphs
      • Constellation and Linear Constellation
      • Spectrum Graph
      • Histogram Graph
      • Eye Diagram
      • Summary Table
    • PTC-ITCR Analyzer Main Menu Map
    • Frequency Menu
    • Signal Standard Menu
    • Amplitude Menu
    • Vertical Scale Menu
    •  Setup Menu
      • Setup (2/2) Menu
    •  Measurement Menu
      • Display Menu
    • Sweep Menu
    • Measure Menu
    • Trace Menu
    • Limit Menu
    • Other Menus
  •  PTC-ACSES Analyzer (Option 731)
    • Introduction
    •  Setup Procedure
      • Start the PTC-ACSES Mode
      • Direct Connection to the Transmitter
      • Over the Air (OTA) Analysis Setup
      • Using the Signal Generator for Receiver or Repeater Analysis
    •  PTC-ACSES Analyzer Graphs
      • Constellation
      • Spectrum
      • Eye Diagram
      • Summary Table
      • Message Decode Table
      • Payload Table
    • PTC-ACSES Analyzer Main Menus
    •  Frequency Menu
      • Signal Standard Menu
    •  Amplitude Menu
      • Scale Menu
    •  Setup Menu
      • Trigger Menu
      • Decode Menu
    •  Measurement Menu
      • PTC-ACSES Analyzer
      • PTC-ACSES Coverage
      • PTC-ACSES PTC Receiver Tester
    • Sweep Menu
    • Trace Menu
    • Limit Menu
    • Other Menus
  •  LMR Coverage Mapping
    • Introduction
    • General Measurement Setups
    •  Coverage Mapping Introduction
      • Outdoor Coverage
      • Indoor Coverage
    •  Anritsu easyMap Tools
      • Terminology:
      • Example Procedure:
      • Creating an Outdoor Map File with easyMap Tools
      • Creating an Indoor Map File with easyMap Tools
    •  Instrument Settings
      • Setup
      • Recall a Map (Indoor or Outdoor Coverage)
      • Recall the Default Grid
    • Measurement Setup for Map Display Type
    •  Measurement Mapping
      • Save the Coverage Mapping Information
    •  Measurements with Graph Display Type
      • Procedure to Monitor Base Station Synchronous Channel Decoding
      • Saving Graph Data
    • Coverage Mapping Menus
    •  Coverage Mapping Menu
      • Mapping Save/Recall Menu
      • Legend Setup Menus
      • Pan & Zoom Menu
      • Point Distance/Time Setup Menu
    • Sweep Menu
    • Measure Menu
    • Trace Menu
    • Limit Menu
    • Other Menus
  •  High Power Input Protection
    • Overview
    •  Measuring a Handheld Transceiver
      • Measuring Receiver Sensitivity
      • Measuring Transmitter Modulation
    •  Measuring a Base Station
      • Measuring Receiver Sensitivity
      • Measuring Transmitter Modulation
  •  Error Messages
    •  P25/P25p2, NXDN, dPMR, TETRA, DMR, and PTC Messages
      • Notifications
      • Warning Messages
      • Data Logging Errors
•  Spectrum Analyzer Measurement Guide
  •  General Information
    • Introduction
    • Product Information, Compliance, and Safety
    • Contacting Anritsu
    • Selecting a Measurement Mode
  •  Spectrum Analyzer
    • Introduction
    • General Measurement Setups
    •  Making Spectrum Analyzer Measurements
      • Setting Frequency
      • Setting Bandwidth Parameters
      • Setting Sweep Parameters
    • Resolution Bandwidth
    • Video Bandwidth
    • Sweep Limitations
    • Attenuator Functions
    • Detection
    • Indications of Excessive Signal Level
    • Preamplifier Measurement Example
    • Field Measurements
    •  Field Strength
      • Introduction
      • Antenna Calculations
    • Occupied Bandwidth Measurement
    •  Channel Power Measurement
      • Introduction
      • Channel Power Measurement for GSM
    • Adjacent Channel Power Measurement
    • EMF Measurement (Option 444)
    • Out‑of‑Band Spurious Emission Measurements
    • In‑Band/Out‑of‑Channel Measurements
    • AM/FM/SSB Demodulation
    • Carrier to Interference Ratio Measurement
    • Emission Mask (In-Band)
    •  Spurious Emissions (Out-of-Band)
      • Creating a New Spurious Emission Mask
      • Loading an Existing Mask
      • Modifying an Existing Mask
      • Spurious Emissions (Out-of-Band) Measurements
    •  IQ Waveform Capture (Option 24)
      • Waveform Capture Setup
      • Capturing a Waveform
    •  Spectrum Analyzer Menus
      • Marker Menu
      • Measure Menu (1 of 5)
      • Measure Menu (2 of 5)
      • Measure Menu (3 of 5)
      • Measure Menu (4 of 5)
      • Measure Menu (5 of 5)
      • Sweep Menu
      • Trace Menus
      • Limit Menus
      • PIM Hunting
      • Application Options Menu
    •  Freq (Frequency) Menu
      • Freq 1/2 (Frequency Menu without Offset)
      • Freq 1/2 (Frequency Menu with Offset Function)
      • Freq 2/2 Menu
    •  Amplitude Menu
      • Amplitude Menu
      • Units & Detection Menu
    • Span Menu
    • Zero Span IF BW Menu (Option 89)
    • BW (Bandwidth) Menu
    •  Marker Menu
      • More Peak Options (Marker & Peak) Menu
      • Marker 2/2 Menu
    •  Sweep Menu
      • Sweep Mode Menu
      • Triggering Menu
      • Trigger Source Menu
      • Gate Setup Menu
    •  Measure Menu
      • Power and BW Menu
      • Field Strength Menu
      • OCC BW Menu
      • Channel Power Menu
      • ACPR Menu
      • EMF Menu (Option 444)
      • Masks and C/I Menu
      • Emission Mask (In-Band) Menu
      • Spurious Emissions (Out-of-Band) Menu
      • C/I Menu
      • C/I Signal Type Menu
      • AM/FM Demod 1/2 Menu
      • Demod Type (AM/FM) Menu
      • AM/FM Demod 2/2 (More) Menu
      • Generator Menu (Optional)
      • IQ Waveform Capture Menu (Option 24)
      • IQ Capture Triggering Menu
      • IQ Capture Save Menu
      • IQ Capture Frequency/Amplitude Menu
      • Coverage Mapping Menu (Option 431)
    •  Trace Menu
      • Trace A Ops Menu
      • Trace B Ops Menu
      • Trace C Ops Menu
    •  Limit Menu
      • Edit Menu (Limit)
      • Edit Menu (Continued)
      • Limit Move Menu
      • Limit Envelope Menu
      • Limit Advanced Menu
    • Application Options Menu
    • Other Menus
  •  Interference Analyzer (Option 25)
    • Introduction
    • General Measurement Setups
    • Spectrum
    • Spectrogram
    • Signal Strength
    • Received Signal Strength Indicator (RSSI)
    • Signal ID
    •  Interference Mapping
      • Overview
      • Interference Mapping (Antenna Only)
      • Interference Mapping (MA2700A and Antenna)
      • Save the Mapping Information
    •  Interference Analyzer (IA) Menu Maps
      • Measurements Menu (1 of 4)
      • Measurements Menu (2 of 4)
      • Measurements Menu (3 of 4)
      • Measurements Menu (4 of 4)
      • Marker Menus
      • Sweep Menus
      • Trace Menus
      • Limit Menus
      • Application Options Menu
    •  Freq (Frequency) Menu
      • Freq 1/2 (Frequency Menu without Offset)
      • Freq 1/2 (Frequency Menu with Offset Function
      • Freq 2/2 Menu
    • Span Menu
    • Zero Span IF BW Menu (Option 89)
    •  Amplitude Menu
      • Units & Detection Menu
    • BW (Bandwidth) Menu
    •  Measurements Menu
      • [Spectrum] Measure Menu
      • Power and BW Menu
      • Field Strength Menu
      • OCC BW Menu
      • Channel Power Menu
      • ACPR Menu
      • EMF Menu (Option 444)
      • Masks and C/I Menu
      • Emission Mask (In-Band) Menu
      • C/I Menu
      • C/I Signal Type Menu
      • AM/FM Demod 1/2 Menu
      • Demod Type Menu
      • AM/FM Demod 2/2 Menu
      • Generator Menu (Optional)
      • IQ Waveform Capture Menu (Option 24)
      • IQ Capture Triggering Menu
      • IQ Capture Save Menu
      • IQ Capture Frequency/Amplitude Menu
      • Coverage Mapping Menu (Option 431)
      • Spectrogram Menu
      • Signal Strength Menu
      • RSSI Menu
      • Signal ID Menu
      • Interference Mapping Menu
      • Bearing Lines Menu
      • Mapping Save/Recall Menu
      • Direction Finding Menu
      • Pan & Zoom Menu
      • DF Sound Settings Menu
    •  Marker Menu
      • Marker and Peak Menu
      • Marker 2/2 Menu
    •  Sweep Menu
      • Sweep Mode Menu
      • Triggering Menu
      • Trigger Source Menu
      • Gate Setup Menu
    •  Trace Menu
      • Trace A Ops Menu
      • Trace B Ops Menu
      • Trace C Ops Menu
    •  Limit Menu
      • [Limit] Edit Menu
      • [Limit] Edit Menu (Continued)
      • Limit Move Menu
      • Limit Envelope Menu
      • Limit Advanced Menu
    • Application Options
    • Other Menus
  •  Channel Scanner (Option 27)
    • Introduction
    • General Measurement Setups
    • Sample Procedure
    • Custom Setup Measurements
    • Custom Setup Example
    • Script Master Measurement Setup
    • Channel Scanner Menu Map
    •  Scanner Menu
      • Channel Scan Menu
      • Freq Scan Menu
      • Scan Script Master Menu
    • Amplitude Menu
    • Custom Scan Menu
    • Measurements Menu
    • Sweep Menu
    • Measure Menu
    • Trace Menu
    • Limit Menu
    • Other Menus
  •  CW Signal Generator (Option 28)
    •  Introduction
      • Additional Required Equipment
    • Procedure
  •  Coverage Mapping (Option 431)
    • Introduction
    • General Measurement Setups
    • Spectrum Analysis Settings
    •  Coverage Mapping
      • Anritsu easyMap Tools
      • Instrument Settings
      • Map the Signal Strength
      • Save the Coverage Mapping Information
    • Coverage Mapping Menus
    •  Coverage Mapping Menu
      • Mapping Save/Recall Menu
      • Pan & Zoom Menu
      • Measurement Setup Menu
      • Point Distance/Time Setup Menu
      • RSSI Menu
      • ACPR Menu
      • Field Strength Menu
  •  AM/FM/PM Analyzer (Option 509)
    • Introduction
    • General Measurement Setup
    • Example FM Demodulation Measurement
    •  AM / FM / PM Analyzer Menus
      • Map of Main Menus
      • Map of Frequency Menus
      • Map of Measurements Menus
      • Map of Audio Demod Menus
    • RF Freq (Frequency) Menu
    • RF Span Menu
    • (Signal) Standard List Menu
    • Amplitude Menu
    • Setup Menu
    • Measurements Menu
    • RF Spectrum Menu
    • Audio Spectrum AM Menu
    • Audio Waveform AM Menu
    • Audio Spectrum FM Menu
    • Audio Waveform FM Menu
    • Audio Spectrum PM Menu
    • Audio Waveform PM Menu
    •  Coverage Mapping Menu
      • Mapping Save/Recall Menu
      • Measurement Setup Menu
      • Point Distance/Time Setup Menu
    • Audio Demod AM Menu
    • Audio Demod FM Menu
    • Marker Menu
  •  Bias Tee (Option 10)
    • Introduction
    • Bias Tee Menu
•  Electromagnetic Field (EMF) MeasurementsOption 444
  •  General Information
    • Introduction
    • Product Information, Compliance, and Safety
    • Contacting Anritsu
    • Selecting a Measurement Mode
    • Connecting the Antenna
  •  Spectrum Analyzer
    • Introduction
    •  Spectrum Analysis EMF Menu
      • EMF Auto Menu
      • Trace Menu
    •  Measurement Results
      • Pass/Fail
  •  LTE/TD-LTE OTA
    • Introduction
    •  LTE/TD-LTE EMF Menu
      • Meas Params Menu (LTE/TD-LTE)
      • RS Display Menu
      • P-SS Display Menu
      • S-SS Display Menu
    •  Measurement Results (LTE/TD-LTE)
      • Pass/Fail
  •  W-CDMA OTA
    • Introduction
    •  W‑CDMA EMF Menu
      • Meas Params Menu (W‑CDMA)
      • Display Menu
    •  Measurement Results (W-CDMA)
      • Pass/Fail
•  Vector Network Analyzer Measurement Guide
  •  General Information
    • Introduction
    • Product Information, Compliance, and Safety
    • Contacting Anritsu
    • VNA Master Models
    • Identifying the Connections
  •  VNA Display Overview
    • Introduction
    •  Powerful Display Capabilities
      • Flexible Features For Displaying Results
      • Active Trace
      • Changing the Active Trace
      • Touch Screen Trace Features
      • Trace Description
      • Example Measurement Displays
    •  Marker and Limit Capabilities
      • Marker Description
      • Selecting the Readout Style for Each Marker
      • Displaying Markers on the Screen
      • Setting Up Delta Markers
      • Setting Up Limits
      • Markers on a Touch Screen
    • Trace Math Capabilities
  •  VNA Fundamentals
    •  Introduction
      • Option 16 (S412E LMR Master)
    •  S‑Parameters
      • Additional Examples:
    • VNA Master Architecture
    • Calculating and Displaying S-Parameters
    • Extracting More Information by Using Markers
    • How Bias is Generated
  •  VNA Measurements
    •  Introduction
      • Select Measurement Type – VNA versus Field
      • Touch Screen Trace Features
      • Markers on a Touch Screen
    •  1‑Port Cable Measurement
      • Introduction
      • Setup Considerations
      • Measurement Readout and Interpretation
    • 1-Port Smith Chart Tuning Example
    •  2-Port Filter Measurement
      • Introduction
      • Setup Considerations
      • Measurement Readout and Interpretation
    •  2-Port Amplifier Measurement
      • Introduction
      • Setup Considerations
      • Measurement Readout and Interpretation
    •  Waveguide Considerations
      • Introduction
      • Setup Considerations
      • Measurement Readout and Interpretation
    •  Calibration Considerations
      • MS20xxB 1‑Path 2‑Port Calibration
      • MS20xxC Full 2‑Port Calibration
      • Calibration Data and Indications
      • Cal Type
  •  Field Measurements
    •  Introduction
      • Options
    •  Field Measurements View Setting
      • Select Measurement Type – Field versus VNA
      • Touch Screen Trace Features
      • Markers on a Touch Screen
    •  Measurement Setup
      • Setting the Frequency Range
      • Setting the Start and Stop Frequencies
      • Setting Data Points
      • Calibration
    •  Graph Type Selector List Box
      • Field Measurements View versus VNA Measurements View
      • Insertion Loss in Display Type Single
      • VSWR and Return Loss in Display Type Dual
      • Insertion Loss and Return Loss in Display Type Overlay
    • Field View Menus
    • VNA Measurements
    • Return Loss/VSWR
    • Cable Loss
    •  Distance-To-Fault (DTF)
      • DTF Measurement Calculations
    •  Phase Measurements
      • 1‑Port Phase Measurement
      • 2‑Port Phase Measurement
    •  Smith Chart
      • Smith Chart Measurement
    •  Log Mag Display Types
      • Typical Log Magnitude Measurement
      • Dual Channel Filter Tuning Measurement
  •  VNA View Menus
    • Introduction
    •  VNA Key Functions
      • Introduction
    •  Domain Setup Menus
      • Freq Menu
      • Setup Domain Menu
      • Time Menu
      • Time Info List Box
      • Windowing Menu
      • Distance Setup Menu
      • Additional Dist Setup Menu (Coax)
      • Cable List Menu (Coax)
      • Additional Dist Setup Menu (Waveguide)
      • Distance Info List Box for Cable
      • Distance Info List Box for Waveguide
      • FGT Menu
      • Gate Menu
      • Gate Setup Menu (continued)
      • Gate Shape Menu
    •  Calibration Menus
      • Calibration Menu
      • Calibration Menu with Thru Update
      • Calibration Line Setup Menu
      • Existing Calibration Information List Box
      • Additional Calibration Considerations
      • DUT Port Setup Menu (Coax)
      • Cal Kit Definition Menus for Coax
      • DUT Connector Selector List Box for Coax
      • SOLT – Coax Menu
      • DUT Port Setup Menu (Waveguide)
      • Cal Kit Definition Menus for Waveguide
      • DUT Connector Selector List Box for Waveguide
      • SOLT – WG Menu
      • Calibration Types
    •  Limit Menus
      • Limit Menu
      • Limit Edit Menu
    •  Marker Menus
      • Marker Menu
      • Marker Search Menu
      • Readout Format Menu
    •  Measurement Menus
      • Measure Menu
      • S‑Parameter List Box
      • S‑Parameter Menu
      • Domain Menu
      • Low Pass Mode Menu
      • Band Pass Mode Menu
      • Number of Traces Menu
      • Trace Format Menu
      • Sweep Menu — MS20xxC
      • Sweep Menu — MS20xxB and S412E
      • Configure Ports Menu
      • Bias Tee Setup Menu
      • Bias Tee Menu (MS20xxC only)
      • Source Power Menu (MS20xxC only)
      • Source Power Menu (MS20xxB and S412E only)
      • Preset Menu
      • Scale Menu
      • Smith Scale Menu
      • Polar Scale Menu
    •  System Menus
      • System Menu
      • Application Options Menu (VNA Mode)
      • Application Options Menu (SPA Mode) VNA Master
      • Application Options Menu (SPA Mode) LMR Master
      • Time Domain Options Menu
      • Trace Menu
      • Display Menu (Trace)
      • Trace Math Menu
  •  Field View Menus
    • Introduction
    •  Field View Menus
      • Field View Menu Group (Field View)
    •  Field View Frequency Menus
      • Freq Menu (Frequency‑Based)
      • Freq/Dist Menu (Distance‑Based)
    •  Distance Menus
      • DTF Menu Group (Field View)
      • DTF Setup Menu
      • Cable List Menu
      • Windowing Menu
    •  Scale Menus
      • Scale Menu Group (Field View)
      • Scale Menu
      • Scale Menu – Single
      • Scale Menu – Dual or Overlay
    •  Sweep Menus
      • Sweep Menu Group (Field View)
      • Sweep Menu
      • Avg/Smooth Menu
      • Output Power
      • Source Power Menu
    •  Measure Menus
      • Measure Menu Group (Field View)
      • Measure Menu – Single
      • Measure Menu – Dual
      • Measure Menu – Overlay
      • Marker Menu
    • Calibration Menu
    • Existing Calibration Information List Box
    • Application Options Menu
  •  Time Domain, Option 2
    • Introduction
    • Time Domain Measurements
    •  VNA Master Implementation
      • One Way versus Round Trip
      • Time Domain – Impulse Response
      • Step Response versus Impulse Response
      • Low Pass versus Band Pass
      • Frequency Gated by Time
      • Waveguide with Dispersion Compensation
      • Phasor Impulse
    • Windowing
    •  Distance‑to‑Fault Measurement Example
      • In the Measure Menu:
      • In the Sweep Menu:
      • In the Freq/Time/Dist Menu:
      • In the Additional Dist Setup Submenu:
    • Time and Distance Information
  •  Distance Domain
    • Introduction
    • Distance Domain Measurements
    •  VNA Master Implementation
      • One Way versus Round Trip
    • Windowing
    •  Distance‑to‑Fault Measurement Example
      • In the Measure Menu:
      • In the Sweep Menu:
      • In the Freq/Dist Menu:
      • In the Additional Dist Setup submenu:
    • Distance Information
  •  Bias Tee, Option 10
    • Introduction
    • Bias Tee Fundamentals
    • How Bias is Generated
    • Bias Tee when Making 2-Port Gain Measurements
    •  Bias Tee Menus (MS20xxC, MS2026B, and MS2028B)
      • Bias Tee Setup Menu
      • Bias Tee Menu
    •  Bias Tee Menus (Field Measurements View)
      • Bias Tee Setup Menu
      • Bias Tee Menu
    • Bias Tee Menus (MS20xxB and S412E in VNA View)
  •  Vector Voltmeter, Option 15
    • Introduction
    • Getting Started
    • Using Vector Voltmeter Mode for the First Time
    • How the VVM Function Works
    • Simple Measurement Using CW Display
    • Calibration Correction
    • Relative Measurements using CW Display
    • Measurements Using Comparison Table Display
    •  Vector Voltmeter Menus
      • CW Menu
      • Table Menu
      • Save/Recall Menu
      • Calibration Menu
  •  Balanced Ports, Option 77
    • Introduction
    • Procedure For Using Balanced Ports
    • Typical Measurements
  •  Formulas
    •  Vector Network Analyzer Formulas
      • Reflection Coefficient
      • Return Loss
      • VSWR
      • Smith Chart
      • Inverted Smith Chart
      • Electrical Length
      • Propagation
      • Cable Loss
      • Fault Resolution
      • Maximum Horizontal Distance
      • Suggested Span
  •  Windowing
    •  Introduction
      • Rectangular Windowing
      • Nominal Side Lobe Windowing
      • Low Side Lobe Windowing
      • Minimum Side Lobe Windowing
  •  Error Messages
    • Introduction
    •  Reset Options
      • Reset Via Instrument Menus
      • Reset from OFF Condition
    •  Self Test or Application Self Test Error Messages
      • Self Test
      • Application Self Test Results Window — VNA
      • Application Self Test (Vector Network Analyzer mode only)
      • Application Self Test Results Window — SPA
    •  Operation Error Messages
      • Fan Failure
      • High Temp Warning
      • Operation not Permitted in Recall Mode
      • PMON PLD Fail
      • Power Supply
      • Error Saving File. General Error Saving File
    •  Vector Network Analyzer Specific Warning Messages
      • Bias Tee cannot be enabled for start freq < 2MHz
      • Bias Tee is not allowed for start freq < 2MHz.
      • Changing Source Power
      • No valid calibration to change correction
      • Cannot continue with calculating
      • Bias Tee state cannot be changed during calibration.
      • Turning Bias Tee to OFF.
      • Turning Bias Tee to OFF.
      • Turning Bias Tee to OFF.
      • Calibration will be lost after change.
      • Changes not allowed during calibration.
      • Option 10 (Bias Tee) not enabled.
      • No External Reference signal detected.
      • Limit is not available for this Graph type.
•  Power Meter Measurement Guide
  •  General Information
    • Introduction
    • Product Information, Compliance, and Safety
    • Contacting Anritsu
    • Power Meter
    • High Accuracy Power Meter
  •  Power Meter
    • Introduction
    •  General Measurement Setup
      • Setting Frequency Span
      • Setting the Amplitude
      • Changing the Display Units
      • Displaying Relative Power
      • Setting Pass Fail Limits
    • Power Meter Menus
    • Freq (Frequency) Menu
    • Frequency Menu with Offset Function
    • Span Menu
    • Amplitude Menu
    • Average Menu
    • Limits Menu
    • Sweep Menu
    • Measure Menu
    • Trace Menu
    • Other Menus
  •  High Accuracy Power Meter
    • Introduction
    • Required Equipment
    •  General Measurement Setup
      • Changing the Display Units
      • Zero and Cal
      • Changing the Scale of the Analog Display
      • Using Attenuators
      • Displaying Relative Power
      • Averaging/Max Hold/Run Hold
      • Limits
    • High Accuracy Power Meter Menus
    • Amplitude Menu
    • Average Menu
    • Zero/Cal Menu
    • Limit Menu
    • Sweep Menu
    • Measure Menu
    • Trace Menu
    • Other Menus
  •  Inline Peak Power Sensor MA24105A
    • Introduction
    • Required Equipment
    • Sensor Power Meter Interface
    • Connection Setup
    •  General Measurement Setup
      • Changing the Display Units
      • Zero and Calibrate
      • Changing the Scale of the Analog Display
      • Using Attenuators
      • Selecting Measurements
    • Menus
    • MA24105A Menu Group
    • Display Menu
    • Forward Menu
    • Reverse Menu
    • Summary Menu
    • Amplitude Menu
    • Units Menu
    • Averages Menu
    • Zero/Cal Menu
    • Cal Factor Menu
    • Limits Menu
    • Video BW Menu
    •  Additional Menus
      • Instrument Mode Selector
      • System Menu
      • File Menu
      • Limits Menu (Instrument)
      • Trace Menu
      • Measure Menu
      • Sweep Menu
      • Calibrate Menu
      • Preset Menu
  •  Error Messages
    • Introduction
    • High Accuracy Power Meter Messages
•  3GPP Signal Analyzer Measurement Guide
  •  General Information
    • Introduction
    • Product Information, Compliance, and Safety
    • Contacting Anritsu
    •  3GPP Signal Analysis Overview
      • GSM/GPRS/EDGE
      • W-CDMA/HSDPA
      • TD-SCDMA/HSDPA
      • LTE
      • TD‑LTE
      • Coverage Mapping
      • NB-IoT
      • EMF Measurements (Option 444)
    • Selecting a Measurement Mode
  •  GSM/GPRS/EDGE Signal Analyzer
    • Introduction
    • Measurement Setup
    • GSM/GPRS/EDGE RF Measurements
    • Measurement Display
    • Demodulator
    •  GSM/GPRS/EDGE Mode Pass/Fail
      • Pass/Fail Mode Procedure
    • Measurement Results
    • GSM/GPRS/EDGE Menus
    • Freq (Frequency) Menu
    • Amplitude Menu
    • Setup Menu
    •  Measurements Menu
      • Spectrum Menu
      • Demodulator Menu
      • Pass/Fail Mode Menu
    • Marker Menu
    • Sweep Menu
    • Measure Menu
    • Trace Menu
    • Limit Menu
    • Other Menus
  •  W-CDMA/HSDPA Signal Analyzer
    • Introduction
    • W-CDMA/HSDPA Measurements
    •  General Measurement Setups
      • Scrambling Code Setup
      • Maximum Spreading Factor Setup
      • S‑CCPCH Spreading Factor, S‑CCPCH Code and PICH Code Setup
      • Threshold Setup
      • Filtered versus Unfiltered Power
    •  W-CDMA/HSDPA RF Measurements
      • Band Spectrum Setup
      • Band Spectrum Procedure
      • Channel Spectrum Setup
      • Channel Spectrum Procedure
      • ACLR Measurement Setup
      • ACLR Measurement Procedure
      • ACLR Multi‑channel ACLR Procedure
      • Spectral Emission Mask Setup
      • Spectral Emission Mask Procedure
      • RF Summary
    •  Demodulator
      • Zoom Function
      • Code Domain Power (CDP) Setup
      • Code Domain Power (CDP) Procedure
      • HSDPA Setup
      • HSDPA Procedure
      • Codogram Setup
      • Codogram Procedure
    •  Over-the-Air Measurements
      • OTA Setup
      • OTA Procedure
      • W-CDMA Summary Setup
      • W-CDMA Summary Procedure
    •  Pass/Fail Mode Setup
      • Pass/Fail Mode Procedure
    • W-CDMA/HSDPA Menus
    • Freq (Frequency) Menu
    • Amplitude Menu
    •  Setup Menu
      • Setup 1/2 Menu
      • Setup 2/2 Menu
    •  Measurements Menu
      • RF Measurement Menu
      • Band Spectrum Menu
      • Channel Spectrum Menu
      • ACLR Menu
      • Demodulator Menu
      • CDP Menu
      • HSDPA Menu
      • Codogram Menu
      • Over‑The‑Air Menu
      • OTA Setup Menu
      • Multipath Menu
      • Pass/Fail Mode Menu
      • ScriptMaster Menu
    • Marker Menu
    • Sweep Menu
    • Trace Menu
    • Limit Menu
    • Other Menus
  •  TD‑SCDMA/HSDPA Signal Analyzer
    • Introduction
    • General Measurement Setups
    •  TD‑SCDMA/HSDPA RF Measurements
      • Measurement Setup
      • Channel Spectrum
      • Power versus Time
      • RF Summary
    •  TD‑SCDMA/HSDPA Demodulator
      • Measurement Setup
      • CDP and CDE
    •  TD‑SCDMA/HSDPA Over‑the‑Air Measurements
      • Measurement Setup
    •  TD‑SCDMA/HSDPA Pass/Fail Measurements
      • Measurement Setup
    • TD‑SCDMA/HSDPA Menus
    • Freq (Frequency) Menu
    • Amplitude Menu
    •  Setup Menu
      • Slot Selection Menu
      • Trigger Menu
      • SYNC‑DL Code Menu
      • Scrambling Code Menu
      • Max Users Menu
      • Advanced Settings Menu
    •  Measurements Menu
      • RF Measurements Menu
      • Power vs. Time Menu
      • Demodulator Menu
      • Over‑The‑Air Menu
      • Pass Fail Mode Menu
    • Sweep Menu
    • Measure Menu
    • Trace Menu
    • Limit Menu
    • Other Menus
  •  LTE Signal Analyzer
    • Introduction
    •  General Measurement Setups
      • Antenna Status
    •  LTE RF Measurements
      • Channel Spectrum
      • ACLR
      • Spectral Emission Mask
      • RF Summary
      • RF Measurement Setups
    •  LTE Modulation Measurements
      • Power vs Resource Block (RB)
      • Constellation
      • Control Channel Power
      • Tx Time Alignment
      • Modulation Summary
      • Modulation Measurement Setups
    •  LTE Over‑the‑Air (OTA) Measurements
      • Antenna Status
      • Scanner
      • Tx Test
      • Mapping (Coverage Mapping)
      • Carrier Aggregation
      • Measurement Setup
    • Pass/Fail Tests
    •  LTE Summary
      • Measurement Setup
    •  LTE Menus
      • LTE Menus (continued)
      • LTE Menus (continued)
    •  Freq (Frequency) Menu
      • Standard List Menu
    • Amplitude Menu
    • Setup Menu
    •  Measurements Menu
      • RF Menu
      • Modulation Menu
      • Power vs. Resource Block Menu
      • Constellation Menu
      • Control Channel Power Menu
      • Over‑the‑Air Menu
      • OTA Scanner Menu
      • Over‑the‑Air Tx Test Menu
      • Coverage Mapping Menu
      • Carrier Aggregation Menu
      • Component Carrier Menu
      • Pass/Fail Test Menu
    •  Marker Menu
      • Power vs Resource Block Marker Menu
    • Calibrate Menu
    • Sweep Menu
    • Measure Menu
    • Trace Menu
    • Limit Menu
    • Other Menus
  •  TD‑LTE Signal Analyzer
    • Introduction
    •  General Measurement Setups
      • Antenna Status
    •  TD‑LTE RF Measurements
      • Channel Spectrum
      • Power vs. Time
      • ACLR
      • Spectral Emission Mask
      • RF Summary
      • RF Measurement Setups
    •  TD‑LTE Modulation Measurements
      • Power vs Resource Block (RB)
      • Constellation
      • Control Channel Power
      • Tx Time Alignment
      • Modulation Summary
      • Modulation Measurement Setups
    •  TD-LTE Over‑the‑Air (OTA) Measurements
      • Antenna Status
      • Scanner
      • Tx Test
      • Mapping (Coverage Mapping)
      • Carrier Aggregation
      • Measurement Setup
    • Pass/Fail Tests
    •  TD‑LTE Summary
      • Measurement Setup
    •  TD‑LTE Menus
      • TD‑LTE Menus (continued)
      • TD-LTE Menus (continued)
    •  Freq (Frequency) Menu
      • Standard List Menu
    • Amplitude Menu
    •  Setup Menu
      • Sync Menu
      • Trigger Menu
    •  Measurements Menu
      • RF Menu
      • Channel Spectrum Menu
      • Power vs. Time Menu
      • Spectral Emission Menu
      • Modulation Menu
      • Power vs. Resource Block Menu
      • Constellation Menu
      • Control Channel Power Menu
      • Over‑the‑Air Menu
      • OTA Scanner Menu
      • Over‑the‑Air Tx Test Menu
      • Coverage Mapping Menu
      • Carrier Aggregation Menu
      • Component Carrier Menu
      • Pass/Fail Test Menu
    •  Marker Menu
      • Power vs Resource Block Marker Menu
    • Calibrate Menu
    • Sweep Menu
    • Measure Menu
    • Trace Menu
    • Limit Menu
    • Other Menus
  •  LTE and TD‑LTE Coverage Mapping
    • Introduction
    • General Measurement Setups
    •  Coverage Mapping
      • Anritsu easyMap Tools
      • Instrument Settings
      • Measurement Setup
      • Measurement Mapping
      • Save the Coverage Mapping Information
    • Coverage Mapping Menus
    •  Coverage Mapping Menu
      • Mapping Save/Recall Menu
      • Measurement Setup Menu
      • Point Distance/Time Setup Menu
  •  NB-IoT Signal Analyzer (Option 887)
    • Introduction
    •  NB‑IoT Measurement Setups
      • NB‑IoT Summary
      • Channel Spectrum
      • Spectral Emission Mask
    • NB-IoT Menus
    • Measurements Menu
    • Channel Spectrum Menu
    • Spectral Emission Menu
  •  Error Messages
    •  3GPP Messages
      • Warning Messages
      • Notifications
    • LTE Messages
    • TD‑LTE Messages
•  WiMAX Signal Analyzer Measurement Guide
  •  General Information
    • Introduction
    • Product Information, Compliance, and Safety
    • Contacting Anritsu
    •  Overview
      • Fixed WiMAX
      • Mobile WiMAX
    • Selecting a Measurement Mode
  •  Fixed WiMAX Signal Analyzer
    • Introduction
    • Fixed WiMAX Measurements
    •  General Measurement Setups
      • CP Ratio (G) Setup
      • Span Setup
      • Frame Length Setup
    •  Fixed WiMAX RF Measurements
      • Setup for Fixed WiMAX RF Measurements
      • Spectrum
      • Power versus Time
      • Adjacent Channel Power Ratio (ACPR)
      • RF Summary
    •  Fixed WiMAX Demodulator
      • Setup for Fixed WiMAX Demodulator Measurements
      • Constellation
      • Spectral Flatness
      • EVM versus SubCarrier
      • EVM versus Symbol
      • Modulation Summary
      • Pass / Fail Mode
      • WiMAX Summary
    • Fixed WiMAX Menus
    • Freq (Frequency) Menu
    • Amplitude Menu
    • Setup Menu
    •  Measurements Menu
      • RF Measurements Menu
      • Demodulator Menu
      • Demodulator Menu (Continued)
      • Pass Fail Mode Menu
    • Sweep Menu
    • Measure Menu
    • Trace Menu
    • Limit Menu
    • Other Menus
  •  Mobile WiMAX Signal Analyzer
    • Introduction
    • Mobile WiMAX Measurements
    •  General Measurement Setups
      • Bandwidth Setup
      • Frame Length Setup
      • Demod Type Setup
      • Span Setup
    •  Mobile WiMAX RF Measurements
      • Setup for RF Measurements
      • Spectrum
      • Power versus Time
      • Spectral Emission Mask
      • Adjacent Channel Power Ratio (ACPR)
      • RF Summary
    •  Mobile WiMAX Demod Measurements
      • Setup for Demodulator Measurements
      • Constellation
      • Spectral Flatness
      • EVM versus Sub Carrier
      • EVM versus Symbol
      • Modulation Summary
      • DL‑MAP Parameter Tree
    •  Mobile WiMAX OTA Measurements
      • Setup for Measurements Setup
      • Channel Power Monitor
      • Preamble Scanner
      • Pass / Fail Mode
      • WiMAX Summary
    • Mobile WiMAX Menus
    • Freq (Frequency) Menu
    • Amplitude Menu
    •  Setup Menu
      • Setup (2) Menu
    •  Measurements Menu
      • RF Measurements Menu
      • Gated Spectrum Menu
      • Demodulator Menu
      • Demodulator Menu (Continued)
      • Over-The Air Menu
      • Pass Fail Mode Menu
    • Marker Menu
    • Sweep Menu
    • Measure Menu
    • Trace Menu
    • Limit Menu
    • Other Menus
  •  Error Messages
    • Introduction
    • Common WiMAX Messages
    • Fixed WiMAX Messages
    • Mobile WiMAX Messages
• TETRA Signal Generator

Land Mobile Radio Analyzer and Coverage Measurement Guide

Anritsu Company